Remote Holder – Free Crochet Pattern | Jo to the World Creations

There is something deeply satisfying about crocheting something practical. Sure, blankets are cozy and amigurumi are adorable, but there is a special kind of joy that comes from making an object that solves a real everyday problem in your home. The remote holder is exactly that kind of project. It sits on your couch arm or hangs from the side of your recliner, keeps your remotes exactly where you left them, and looks charming while doing it. Today I am sharing a completely free crochet pattern for a remote holder that is beginner-friendly, works up quickly, and makes a wonderful gift for anyone who has ever lost a remote in the couch cushions — which, let’s be honest, is all of us.

Whether you are new to crochet or a seasoned maker looking for a fast weekend project, this pattern is for you. Let’s get into everything you need to know before you pick up your hook.

Why You Need a Crochet Remote Holder

Before we dive into the pattern, let me make the case for why this little project deserves a spot in your queue.

First, think about how many times a week you pat down the couch cushions searching for the TV remote. Or the streaming device remote. Or the soundbar remote. Because apparently we live in a world where one screen requires three separate remotes, and none of them are ever in the same place twice. A remote holder puts an end to that chaos.

Second, this project uses a relatively small amount of yarn, which makes it a perfect stash buster. If you have been crocheting for any length of time, you almost certainly have partial skeins of worsted weight yarn sitting in a bin somewhere. This pattern uses that yarn in the best possible way.

Third, it is genuinely quick. Most crocheters can finish this project in one or two evenings. That means it is also an excellent last-minute gift idea. A handmade, useful, personalized gift that takes only a few hours to complete? Yes, please.

Finally, it is customizable. You can make it longer or shorter to accommodate different sized remotes, change the colors to match your living room decor, or add embellishments like buttons or a simple embroidered design on the front. The base pattern is your starting point, not your limit.

Materials You Will Need

One of the best things about this project is how simple the supply list is. Here is everything you need to gather before you sit down to crochet.

Yarn: Worsted weight yarn (size 4) in one or two colors of your choice. You will not need a full skein for the holder itself — approximately 50 to 75 yards of your main color and around 20 yards of a contrasting color (if you choose to use one) is plenty. Acrylic yarn works beautifully here because it is durable, washable, and widely available. Cotton yarn is another great option if you prefer a slightly stiffer fabric that holds its shape well.

Hook: A 5.0 mm (H/8) crochet hook is recommended, but if your gauge runs tight or loose, feel free to adjust up or down by half a size.

Notions: A yarn needle for weaving in ends, scissors, and two buttons if you want to add a decorative or functional touch to the strap. Stitch markers are helpful but not required.

Gauge

Gauge is not critical for this pattern since it is a home accessory and not a garment, but here is a general reference point so you can understand the approximate sizing:

14 single crochets and 16 rows = 4 inches using a 5.0 mm hook and worsted weight yarn.

If your finished holder ends up slightly larger or smaller than the dimensions listed below, it will still work just fine. Adjust your starting chain if you want a very specific size.

Finished Dimensions

The remote holder as written measures approximately 5 inches wide and 9 inches tall when laid flat. It has two pockets — one deeper pocket for a larger remote and one shallower pocket for a smaller remote or TV guide — and a strap that loops over the arm of a couch or recliner.

Pattern Abbreviations

Throughout this pattern, the following abbreviations are used:

• ch — chain
• sc — single crochet
• hdc — half double crochet
• sl st — slip stitch
• st(s) — stitch(es)
• RS — right side
• WS — wrong side
• rep — repeat
• sp — space

Notes Before You Begin

This pattern is worked flat in rows to create the body of the holder and the pockets. The pieces are then seamed together with a simple slip stitch join. The strap is worked as a separate strip and attached at the end.

If you choose to work in two colors, the color changes will be noted within the pattern. Color A is your main color and Color B is your accent or contrasting color.

Turn your work at the end of every row unless otherwise noted.

Chain one at the beginning of rows does not count as a stitch in this pattern.

The Pattern

Part One: The Back Panel

The back panel forms the main body of the holder. It is the piece that all other components will attach to.

Foundation: Using Color A and a 5.0 mm hook, chain 21.

Row 1: Starting in the second chain from the hook, sc across. (20 sts) Ch 1, turn.

Rows 2 through 36: Sc in each stitch across. (20 sts) Ch 1, turn.

At the end of Row 36, fasten off and weave in ends. You now have a rectangle measuring approximately 5 inches wide by 9 inches tall.

Set this piece aside.

Part Two: The Large Pocket

The large pocket holds your biggest remote — typically the main TV or cable remote.

Foundation: Using Color A, chain 21.

Row 1: Starting in the second chain from the hook, sc across. (20 sts) Ch 1, turn.

Rows 2 through 20: Sc in each stitch across. (20 sts) Ch 1, turn.

At the end of Row 20, do not fasten off. Instead, you will now work a border around the top edge of the pocket to give it a finished look.

Top Border (optional but recommended): Switch to Color B if using. Ch 1. Work one row of hdc across the top edge of the pocket (20 hdc). Fasten off and weave in ends.

If working in a single color, simply fasten off after Row 20 and your pocket is complete.

Part Three: The Small Pocket

The small pocket sits above the large pocket and is perfect for a streaming remote, a small notepad, or even a TV guide.

Foundation: Using Color A, chain 21.

Row 1: Starting in the second chain from the hook, sc across. (20 sts) Ch 1, turn.

Rows 2 through 12: Sc in each stitch across. (20 sts) Ch 1, turn.

At the end of Row 12, add the optional top border in Color B as described above, or fasten off in Color A.

Part Four: The Strap

The strap loops over the arm of your couch and keeps the holder in place. It can also be hung over a doorknob or cabinet handle if you want to store your remotes in a different location.

Foundation: Using Color A, chain 7.

Row 1: Starting in the second chain from the hook, sc across. (6 sts) Ch 1, turn.

Rows 2 through 50: Sc in each stitch across. (6 sts) Ch 1, turn.

At the end of Row 50, fasten off, leaving a long tail for sewing. The strap should measure approximately 12 to 13 inches long. If your couch arm is particularly thick, add more rows as needed — just be sure to test the fit before fastening off.

Part Five: Assembly

Now it is time to put everything together. This is my favorite part because you get to see the project come to life. Lay out all your pieces on a flat surface.

Attaching the Large Pocket: Place the large pocket on top of the back panel, aligning the bottom edges and side edges. The right sides of both pieces should be facing you. Using your yarn needle and a length of Color A, whip stitch or slip stitch along the bottom edge and both side edges of the large pocket, attaching it to the back panel. Leave the top edge open — this is the opening where your remote will slide in.

Attaching the Small Pocket: Place the small pocket above the large pocket, leaving a small gap of about half an inch between the two pockets. Align the side edges of the small pocket with the side edges of the back panel. Sew the bottom and sides of the small pocket to the back panel in the same way, leaving the top open.

Attaching the Strap: Fold the strap in half to find the center point. Attach the center of the strap to the top center of the back panel on the wrong side. Sew both ends of the strap down securely, stitching back and forth several times to make sure it is strong enough to hold the weight of the remotes. The strap should loop away from the pocket side of the holder.

Finishing: Weave in any remaining ends. Give your finished holder a light blocking or steaming if the edges are curling. Cotton yarn especially benefits from a good blocking session.

Adding Buttons

If you want to add buttons to the front of the holder, now is the time. Buttons serve both a decorative and functional purpose — you can use them as closures by adding simple chain loop button holes to the top of each pocket, or you can sew them onto the front of the pockets purely as embellishment.

To make a simple button hole closure, work your top border row as normal but stop a few stitches before the end. Chain 2, skip 2 stitches, then continue to the end of the row. The chain-2 space creates a loop that fits over a standard button. Place your button on the front panel of the body, aligned with the loop, and sew it in place securely.

Color Combination Ideas

One of the most fun parts of making this project is choosing your colors. Here are a few combinations that look especially beautiful and that I have seen crocheted versions of in the wild:

A classic combination is a neutral main color like cream, oatmeal, or gray paired with a warm terracotta or mustard accent. This palette works with almost any living room and has a modern, earthy feel.

For something more cheerful and cottagecore-inspired, try a sage green main color with an off-white border. Add a simple floral button or two and you have something that looks like it belongs in a farmhouse Pinterest board in the best possible way.

If you are making this as a gift for someone who loves bold color, consider going all in with a jewel tone like deep teal, burgundy, or navy. A pop of gold or cream as the border color elevates it instantly.

For a more gender-neutral or minimalist look, a simple single-color version in a chunky, heathered gray or charcoal can look incredibly sophisticated and intentional.

Tips for Success

Even though this is a beginner-friendly pattern, here are a few things that will make your finished product look extra polished.

Keep your tension consistent throughout. If you tend to crochet tightly when you are focused and loosely when you relax, try to stay mindful of this, especially on longer rows. Inconsistent tension is the most common reason for wavy edges.

Count your stitches at the end of every few rows. It is much easier to catch a missed or extra stitch early than to discover the mistake ten rows later.

When seaming your pieces together, match your stitch count carefully along the sides to make sure everything lines up evenly. Use stitch markers to pin the pieces together before you sew if it helps you stay aligned.

If you want extra durability, especially if this will be used daily and tugged on repeatedly, consider adding a second row of stitching along the seams for reinforcement.

Gifting Ideas

The crochet remote holder makes a wonderful gift for so many people. It is a particularly thoughtful choice for grandparents or elderly relatives who might struggle to keep track of multiple remotes. It is also a great housewarming gift because it is both practical and personal — something a store-bought item rarely manages to be at the same time.

For a complete gift set, consider pairing the remote holder with a small crocheted coaster or a matching mug cozy. Use the same color palette throughout to make the set look intentional and coordinated.

If you are gifting it for the holidays, a rich burgundy and cream combination looks festive without being over the top. A gift tag that says “no more lost remotes” never fails to get a laugh.

You can also personalize the project by using the recipient’s favorite sports team colors, their home decor palette, or a color that has meaning to them. That level of thoughtfulness is what makes handmade gifts so special.

Sharing Your Make

If you crochet this remote holder using this free pattern, I would absolutely love to see it. Share your finished project on Instagram and tag me so I can see what colors and variations you came up with. The crochet community is such a wonderful, generous, creative space, and seeing your makes is honestly one of the best parts of sharing patterns here.

If you have any questions about the pattern as you work through it, drop them in the comments below. I check comments regularly and am happy to help you work through any confusing steps.

If this pattern was helpful to you, consider sharing it with a friend who crochets or pinning it to your project board on Pinterest. Sharing free patterns is one of the kindest things you can do for a small creator, and it costs nothing at all.

Final Thoughts

The remote holder is one of those projects that reminds you why you fell in love with crochet in the first place. It is fast, it is practical, it uses up yarn you already have, and it makes someone’s daily life just a little bit easier and a little bit more beautiful. That combination is hard to beat.

Whether you are making this for yourself, for a family member, or as a quick and heartfelt gift, I hope this pattern brings you as much joy to make as it brings the recipient to use. Happy crocheting, and as always — keep creating.

This pattern is free for personal use. Please do not redistribute or sell this pattern as your own. If you make finished items to sell from this pattern, credit to Jo to the World Creations is appreciated. Thank you for supporting handmade.