Crochet Avocado Phone Holder Pattern: Wall Pocket Organizer & Charging Station (PDF DIY)
If you’ve been looking for a crochet project that’s equal parts functional and adorable, this crochet avocado phone holder pattern is exactly what you need. Combining the beloved avocado aesthetic with practical home organization, this wall pocket organizer doubles as a charging station to keep your phone, cords, and small essentials neatly tucked away. Whether you’re a seasoned crocheter or someone who’s moved past beginner basics, this pattern is satisfying to make, quick to finish, and genuinely useful once it’s hanging on your wall.
In this post, you’ll find a full walkthrough of the pattern, materials, stitches, sizing, and tips to help you create your own crochet avocado wall pocket organizer. A downloadable PDF version is available for those who prefer to work from a printed pattern, and every step is written out here in full so you can get started right away.
Why a Crochet Avocado Phone Holder?
Avocados have had a long run as a pop culture icon, and for good reason — the shape is instantly recognizable, the color combination of green and brown is naturally pleasing, and the pit detail adds a fun three-dimensional element that makes any crochet project feel polished and complete.
But beyond the aesthetics, a wall-mounted phone holder solves a very real problem. How many times have you set your phone on the counter while it charges, only to have it fall, get buried under mail, or just generally get in the way? A crochet wall pocket organizer gives your phone a designated spot, keeps the charging cable tidy, and adds a handmade touch to any room — kitchen, bedroom, home office, or entryway.
This pattern creates a wall pocket large enough to hold most standard smartphones, with enough depth to keep the phone from slipping out while it charges. The loop at the top makes it easy to hang from a nail, hook, or command strip, and the finished piece is lightweight enough that it won’t pull on your wall.
Materials You’ll Need
Before casting on (or rather, making that slip knot), gather everything you need. Having your materials ready makes the process smooth and enjoyable.
Yarn: You’ll need three colors. The main color for the avocado exterior is a medium green (suggested: sage, avocado green, or forest green in worsted weight). The second color is a pale yellow-green or cream for the avocado flesh interior. The third color is a warm brown for the pit. Approximately 80–100 yards of the main green, 40–50 yards of the cream or yellow-green, and about 15–20 yards of brown will be enough. Worsted weight (size 4) yarn works best for this pattern because it creates a sturdy pocket that holds its shape.
Hook: A 5.0 mm (H/8) crochet hook is recommended for worsted weight yarn. If your tension tends to run loose, try a 4.5 mm hook. If it runs tight, a 5.5 mm hook will help.
Additional supplies: A yarn needle for weaving in ends and sewing pieces together, scissors, stitch markers (helpful but optional), and a small button or decorative element if you’d like to add a feature to the pit. A piece of cardboard or plastic canvas cut to fit the bottom of the pocket can add stiffness if desired, though it isn’t necessary.
Gauge: Approximately 14 sc x 16 rows = 4 inches in single crochet. Gauge isn’t critical for this project, but keeping it consistent will affect the final size. The finished wall pocket is approximately 7 inches wide and 9 inches tall, which fits most smartphones comfortably.
Stitches and Abbreviations Used
This pattern uses standard US crochet terminology. Here’s a quick reference:
ch — chain
sl st — slip stitch
sc — single crochet
hdc — half double crochet
dc — double crochet
inc — increase (two single crochets in the same stitch)
dec — invisible decrease (insert hook in front loops only of the next two stitches and complete as a single crochet)
BLO — back loop only
FLO — front loop only
MR — magic ring (also called magic circle)
st(s) — stitch(es)
rnd — round
rep — repeat
Part One: The Back Panel (Avocado Shell)
The back panel forms the full avocado shape and creates the back wall of your pocket. It is worked in the main green yarn.
Foundation: Begin with a magic ring.
Rnd 1: Ch 1, work 6 sc into the magic ring, sl st to join. (6 sts)
Rnd 2: Ch 1, 2 sc in each st around, sl st to join. (12 sts)
Rnd 3: Ch 1, sc in next st, inc in next st, rep around, sl st to join. (18 sts)
Rnd 4: Ch 1, sc in next 2 sts, inc in next st, rep around, sl st to join. (24 sts)
Rnd 5: Ch 1, sc in next 3 sts, inc in next st, rep around, sl st to join. (30 sts)
Rnd 6: Ch 1, sc in next 4 sts, inc in next st, rep around, sl st to join. (36 sts)
Rnd 7: Ch 1, sc in next 5 sts, inc in next st, rep around, sl st to join. (42 sts)
Rnd 8: Ch 1, sc in each st around, sl st to join. (42 sts)
At this point you’ve worked the rounded bottom of the avocado. Now you’ll begin shaping the sides to create the elongated avocado silhouette.
Rnds 9–14: Ch 1, sc in each st around, sl st to join. (42 sts)
Rnd 15: Ch 1, sc in next 5 sts, dec, rep around, sl st to join. (36 sts)
Rnds 16–18: Ch 1, sc in each st around, sl st to join. (36 sts)
Rnd 19: Ch 1, sc in next 4 sts, dec, rep around, sl st to join. (30 sts)
Rnds 20–22: Ch 1, sc in each st around, sl st to join. (30 sts)
Rnd 23: Ch 1, sc in next 3 sts, dec, rep around, sl st to join. (24 sts)
Rnd 24: Ch 1, sc in each st around, sl st to join. (24 sts)
Rnd 25: Ch 1, sc in next 2 sts, dec, rep around, sl st to join. (18 sts)
Rnds 26–27: Ch 1, sc in each st around, sl st to join. (18 sts)
Rnd 28: Ch 1, sc in next st, dec, rep around, sl st to join. (12 sts)
Fasten off, leaving a 6-inch tail. This completes the back panel. Set it aside.
Part Two: The Front Pocket (Avocado Flesh)
The front pocket is worked in the cream or yellow-green yarn and is slightly smaller than the back panel. It doesn’t close all the way at the top, which creates the open pocket opening where you’ll slide your phone in and out.
Foundation: Begin with a magic ring.
Rnd 1: Ch 1, work 6 sc into the magic ring, sl st to join. (6 sts)
Rnd 2: Ch 1, 2 sc in each st around, sl st to join. (12 sts)
Rnd 3: Ch 1, sc in next st, inc in next st, rep around, sl st to join. (18 sts)
Rnd 4: Ch 1, sc in next 2 sts, inc in next st, rep around, sl st to join. (24 sts)
Rnd 5: Ch 1, sc in next 3 sts, inc in next st, rep around, sl st to join. (30 sts)
Rnd 6: Ch 1, sc in next 4 sts, inc in next st, rep around, sl st to join. (36 sts)
Rnd 7: Ch 1, sc in each st around, sl st to join. (36 sts)
Rnds 8–14: Ch 1, sc in each st around, sl st to join. (36 sts)
Rnd 15: Ch 1, sc in next 4 sts, dec, rep around, sl st to join. (30 sts)
Rnds 16–17: Ch 1, sc in each st around, sl st to join. (30 sts)
Rnd 18: Ch 1, sc in next 3 sts, dec, rep around, sl st to join. (24 sts)
Rnds 19–20: Ch 1, sc in each st around, sl st to join. (24 sts)
Now you’ll work in rows rather than rounds to create the open top of the pocket.
Row 21: Ch 1, turn, sc in next 12 sts. (12 sts) — You are now working across only the front half of the piece.
Rows 22–24: Ch 1, turn, sc across. (12 sts)
Fasten off and weave in the end. This completes the front pocket panel.
Part Three: The Pit
The pit is worked in brown yarn in the round and is sewn onto the front pocket piece before assembly.
Rnd 1: Magic ring, ch 1, 6 sc into the ring, sl st to join. (6 sts)
Rnd 2: Ch 1, 2 sc in each st around, sl st to join. (12 sts)
Rnd 3: Ch 1, sc in next st, inc in next st, rep around, sl st to join. (18 sts)
Rnd 4: Ch 1, sc in each st around, sl st to join. (18 sts)
Rnd 5: Ch 1, BLO sc in each st around, sl st to join. (18 sts) — This creates a slight ridge that makes the pit look dimensional.
Fasten off, leaving a long tail for sewing. Lightly stuff the pit with a small amount of fiberfill or a scrap of yarn to give it a slight puffy appearance, then sew it to the center of the front pocket panel. Position it in the upper-middle area of the pocket, roughly where a real avocado pit would sit. Weave in all ends.
Part Four: Assembly
Now you’ll join the front pocket panel to the back panel. This is the step that transforms your two flat pieces into a functional wall pocket.
Place the front pocket piece on top of the back panel, aligning the bottom points. The front piece is slightly smaller, so the green edges of the back panel will show around the perimeter — this creates the look of the avocado’s outer skin framing the flesh interior.
Using your yarn needle and a length of the main green yarn (or cream yarn, whichever you prefer — green blends in better along the outer edge), whipstitch or sc the two pieces together along the sides and bottom, leaving the top open as the pocket opening. Work carefully to keep even tension so the seam lies flat.
Once the sides and bottom are joined, you should have a clean, open-topped pocket that holds its avocado shape nicely.
Part Five: The Hanging Loop
The hanging loop is what turns this crochet wall pocket into a functional organizer. It is attached at the top of the back panel.
Using the main green yarn, join yarn to the top center stitch of the back panel.
Ch 15, sl st back into the same stitch to form a loop. Fasten off and weave in ends.
Alternatively, if you want a sturdier loop, work the chain, then sc back along the chain for added structure. A reinforced loop will hold up better if the phone holder is used daily and carries a heavier device.
Part Six: The Cable Opening (Optional but Recommended)
For this piece to function as a true charging station, you need a way to thread your charging cable into the pocket so your phone can charge while it rests inside.
The simplest approach is to leave a small gap in your side seam near the bottom of the pocket — approximately 1–1.5 inches — when you sew the front and back panels together. This gap is the perfect size for a standard charging cable. Thread the cable through from the back, plug it into your phone, and tuck the phone into the pocket. The cable sits neatly at the back, and the phone rests face-forward in the pocket.
Another option is to create a small buttonhole-style opening by chaining a few stitches and skipping the equivalent number of stitches when seaming. This creates a neater, more intentional-looking cable opening.
Finishing Touches and Customization
Once your avocado phone holder is assembled, there are several ways to personalize it and make it your own.
Texture on the green shell: Work the back panel in BLO (back loop only) for every other round to create a subtle ribbed texture that mimics the slight roughness of an avocado skin.
Darker green edges: Use a slightly darker green yarn to sc around the very outer edge of the assembled piece for a finished, polished border.
Adding a small side pocket: Crochet a small rectangle approximately 3 x 4 inches and sew it to the back of the piece to hold a charging cable or earbud case.
Seasonal swaps: Try the same pattern in orange and cream for a pumpkin version in fall, or in pink and yellow for a peach. The basic shape translates beautifully to many fruits and vegetables.
Gift-giving: This pattern makes a wonderful handmade gift. A set of two — one avocado and one complementary fruit shape — makes a thoughtful housewarming or birthday present. Include a note card with hanging instructions and it becomes a complete, ready-to-use gift.
Hanging Your Wall Pocket Organizer
Once your crochet avocado phone holder is finished and all ends are woven in, it’s time to hang it up. Choose a spot near an outlet so the charging cable can reach comfortably. A small nail, adhesive hook, or removable command strip all work well.
The best height for a wall phone holder is roughly counter or desk height — somewhere you can easily slide your phone in and out without having to reach up or bend down. Near a kitchen backsplash, beside a bed, or above a desk are all popular placements.
If you’re gifting this piece or selling it, include a simple hang tag with care instructions. This wall pocket can be spot-cleaned with a damp cloth or hand-washed gently in cool water. Lay flat to dry to maintain the shape.
Downloadable PDF Pattern
A clean, printer-friendly PDF version of this crochet avocado phone holder pattern is available for download. The PDF includes the full pattern as written above, a materials list, stitch guide, and an assembly diagram. Having a printed copy is especially helpful when working through the shaping rows, since it lets you check off each round as you go.
The PDF is formatted to print neatly on standard letter or A4 paper, and all stitch counts are clearly labeled so you always know where you are in the pattern.
Tips for Success
If you’ve never worked a crochet wall pocket before, a few practical tips will help the process go more smoothly.
Use stitch markers at the beginning of each round so you never lose your place. Even experienced crocheters benefit from marking the first stitch of a round when working in the round with joined rows.
Block your finished pieces before assembly if you want crisp, defined edges. A light steam block or a damp towel press will even out any uneven tension and help the avocado shape lie perfectly flat.
When sewing the two panels together, pin them first with locking stitch markers or straight pins. Pinning before sewing ensures the bottom points align and the pocket doesn’t pucker or twist.
If you want the front pocket to hold its shape more firmly — especially useful if you’re storing a heavier phone — cut a piece of plastic canvas slightly smaller than the interior of the pocket and slip it in before sewing up the sides. This creates a firm back wall that keeps the pocket from collapsing.
Count your
