How To Make Easy Colourful DIY T-shirt Yarn Bracelets

How To Make Easy Colourful DIY T-shirt Yarn Bracelets

There is something deeply satisfying about turning old, worn-out t-shirts into something beautiful that you can wear every single day. T-shirt yarn bracelets have become one of the most popular DIY jewellery projects for good reason — they are affordable, beginner-friendly, endlessly customisable, and they give new life to fabric that might otherwise end up in a landfill. Whether you are completely new to crafting or you have been making things with your hands for years, this project will walk you through everything you need to know to create stunning, colourful bracelets that look like they came straight from a boutique.

In this guide, you will learn how to cut your own t-shirt yarn, choose the right colours, and use a few simple braiding and knotting techniques to make bracelets you will actually want to wear. No sewing machine, no expensive tools, and no experience required. Just a bit of patience, a pair of scissors, and some creativity.


What Is T-shirt Yarn and Why Is It Perfect for Bracelets?

T-shirt yarn, often called tarn (a portmanteau of “t-shirt” and “yarn”), is exactly what it sounds like — strips of t-shirt fabric that have been cut and stretched into a soft, flexible yarn-like material. When you cut a knit fabric like jersey cotton on the bias or in horizontal strips and give it a gentle tug, the edges curl inward naturally, creating a smooth, rounded cord that is comfortable against the skin and incredibly versatile.

Unlike traditional yarn or twine, t-shirt yarn has a soft, slightly stretchy quality that makes it ideal for bracelets. It sits comfortably on the wrist without digging in, it holds knots securely, and it comes in an enormous range of colours depending on the t-shirts you choose to repurpose. The texture also means that braided or knotted bracelets have a lovely, slightly chunky look that suits casual and boho styles perfectly.

From an environmental perspective, using old t-shirts is a wonderful way to reduce textile waste. Millions of tonnes of clothing end up in landfill every year, and upcycling even a handful of old shirts into handmade accessories is a small but meaningful step in the right direction. Plus, you get beautiful jewellery out of the deal — which is never a bad thing.


What You Will Need

Before you start cutting and braiding, gather your materials. The good news is that most of what you need you probably already have at home.

Old t-shirts: Look for 100% cotton or cotton-rich jersey knit fabric. Avoid shirts with a lot of polyester blending or woven fabric, as these will not curl properly when cut. Bright colours, bold prints, tie-dye patterns, and even plain white shirts that you plan to dye all work beautifully. Gather as many as you like — you will not need very much fabric from each shirt, so this is a great project to do with a pile of old clothes you have been meaning to sort through.

Sharp fabric scissors: A clean, sharp cut makes a huge difference to the finished quality of your yarn. Dull scissors will fray the edges and make the strips harder to work with. If your craft scissors have seen better days, now is a good time to replace them or at least sharpen them.

A ruler and fabric marker or chalk: These are helpful for marking consistent strip widths before you cut. For bracelets, strips that are roughly 1 to 1.5 centimetres wide work best. Wider strips create chunkier bracelets, while narrower strips give a more delicate result.

A cutting mat: Optional but very handy if you want to cut multiple strips quickly and evenly.

Measuring tape: You will need this to measure your wrist and determine how long to cut your strips.

Clipboard or piece of tape: These help hold the top of your braid or knot work in place while you work, which makes the whole process much easier.

Optional embellishments: Beads with large holes, small charms, rings, or feathers can all be incorporated into your bracelet designs for extra detail.


How to Cut T-shirt Yarn for Bracelets

Cutting consistent, smooth t-shirt yarn is the foundation of a great bracelet. Take your time with this step and your finished piece will look much more polished.

Start by laying your t-shirt flat on a table or cutting mat. Smooth out any wrinkles with your hands. Cut off the hemmed bottom of the shirt — this part is usually a little stiffer than the rest of the fabric and does not stretch and curl as nicely. Set the hem aside or save it for another project.

Next, cut the shirt into horizontal strips working from the bottom up. Each strip should be roughly 1 to 1.5 centimetres wide. Try to keep the width as consistent as possible — a ruler and fabric chalk make this much easier. Cut through both layers of the shirt at once so that each cut creates a continuous loop of fabric.

Now comes the satisfying part. Pick up each loop and give it a firm, steady stretch. You will see and feel the edges curl inward, transforming the flat strip into a smooth, rounded cord. Work your way along the entire loop, stretching evenly as you go. Once stretched, your t-shirt yarn is ready to use.

For bracelets, you generally need strips that are quite long — usually around 60 to 80 centimetres per strand before braiding or knotting, though this will vary depending on the technique you choose. It is always better to cut strips a little longer than you think you need, since you can always trim the ends but you cannot add length once you have started working.

If your shirt is not very big, you can join strips together by cutting a small slit near the end of each strip and linking them together — a technique often called “the magic knot” or the “looping join.” Done carefully, this join is nearly invisible in the finished bracelet.


Choosing Your Colour Palette

One of the most joyful parts of this project is choosing your colours. Because you are working with fabric rather than purchased materials, your colour choices depend on what t-shirts you have available — but that is part of the fun. Rummage through your old clothes, ask friends or family if they have any unwanted shirts, or visit a charity shop and pick up a few brightly coloured pieces for next to nothing.

When choosing colours for a single bracelet, think about what tends to look good together. Some approaches that work particularly well include sticking to the same colour family (all blues and teals, for example), combining complementary colours that sit opposite each other on the colour wheel (like orange and blue, or purple and yellow), or using a neutral like white or grey alongside two or three bolder shades. Tie-dye or ombre fabrics add natural colour variation without any extra work, and they create beautiful, complex-looking results.

Do not be afraid to mix textures either. A strip of slightly textured jersey alongside a smoother, thinner strip can add lovely visual depth to a simple braid.

If you want specific colours that you cannot source from old shirts, you can dye plain white cotton strips using fabric dye, Dylon, or even natural dye from plants like onion skins, beetroot, or turmeric. This is a whole project in itself and a wonderful rabbit hole to fall down if you enjoy experimenting.


Basic Three-Strand Braid Bracelet

The three-strand braid is the simplest bracelet you can make and a perfect starting point for beginners. Even if you have never braided anything before, you will get the hang of this within a minute or two.

Cut three strips of t-shirt yarn, each about 70 to 80 centimetres long. Gather them together at one end and tie a simple overhand knot, leaving a tail of about 8 to 10 centimetres beyond the knot — this tail will form part of the fastening. Secure the knotted end to a flat surface using a clipboard or a piece of tape.

Spread the three strands out in front of you. For a standard braid, you are simply going to pass the right strand over the middle strand, then the left strand over the middle strand, and repeat. Keep a consistent tension as you work — not too tight, not too loose — and you will end up with a neat, even braid.

Continue braiding until the bracelet is long enough to wrap around your wrist with a little room to spare. Tie another overhand knot at the end, again leaving a tail of about 8 to 10 centimetres. Trim the ends neatly and your bracelet is done.

To fasten it, simply tie the two tails together around your wrist, or thread a bead onto one tail and tie a knot in the other — the bead will slip through the loop created by the knot on the opposite end, creating a simple and very elegant sliding clasp.


Square Knot (Macramé) Bracelet

If you want to take things up a notch, a square knot bracelet gives a beautiful, more intricate result that still only requires one basic technique. This is the foundation of macramé, a craft that has been enjoying a huge revival in recent years.

For a square knot bracelet, you will need four strands of t-shirt yarn. Cut two shorter strands of about 60 centimetres each — these will be your core strands that run down the middle of the bracelet without being knotted. Then cut two much longer strands of around 120 centimetres each — these are the working strands that do all the knotting.

Fold all four strands in half and loop them through a ring or simply tie them together at the top. Arrange them so the two core strands are in the middle and one long working strand hangs on either side.

To make a square knot, take the left working strand and lay it over the two core strands, forming a shape like the number four. Now take the right working strand and pass it under the two core strands and up through the loop created by the left strand. Pull both working strands outward and upward to tighten — this is the first half of the square knot.

Now reverse it. Take the right working strand and lay it over the two core strands in a mirrored four shape. Take the left working strand, pass it under the core and up through the loop, then pull tight. That is a full square knot.

Repeat this process, working downward, until your bracelet is the right length. The result is a beautiful, raised, rope-like design that looks intricate but is surprisingly quick to make once you find your rhythm.


Friendship Bracelet Style with Colour Changes

For a more colourful, festival-style bracelet reminiscent of classic friendship bracelets, try working with five or six strands in different colours and using simple forward and backward knots to create diagonal stripes or chevron patterns.

The technique here involves knotting each strand over its neighbour, working from left to right across all strands for one row, then reversing direction for the next. Each time a strand travels across all the others, it creates a row of colour. Changing which strand you start with changes the colour of that row.

This technique takes a little more practice than a basic braid, but once it clicks, it is completely addictive. There are hundreds of pattern variations — arrows, diamonds, hearts, checkerboards — and the same fundamental knotting technique creates them all. With the thicker, softer texture of t-shirt yarn, the results have a lovely modern, chunky quality compared to traditional embroidery thread friendship bracelets.


Finishing and Fastening Your Bracelet

No matter which technique you use, the finishing touches make a big difference to how professional your bracelet looks. Take a few extra minutes here and it will be worth it.

Trim all loose ends as close to the last knot as you can without risking the knot coming undone. If you are worried about fraying, apply a tiny dab of clear fabric glue or Fray Check to the ends and let them dry completely before wearing.

For fastening, you have several options. A simple overhand knot on each end, looped around each other, is the easiest. A sliding knot closure, made by threading one tail through a small loop of yarn and tying it in place, creates a bracelet that can be adjusted to different wrist sizes — this is especially nice if you are making bracelets as gifts. You can also add a simple toggle clasp by threading a small button onto one end and looping the other end into a tight loop just big enough for the button to pass through.


Tips for Making Your Bracelets Even Better

Consistency in tension while braiding or knotting makes the biggest difference to the finished look. Try to keep an even, steady pull on your working strands throughout. If you notice your work getting tighter or looser, stop and adjust before continuing.

Always measure your wrist before you start and add at least two to three centimetres for comfort. A bracelet that is too tight is uncomfortable, and one that is too loose will keep sliding off.

Making bracelets in batches is a great way to build up a collection or create gift sets. Once you have your t-shirt yarn cut and your colours chosen, you can knock out several bracelets in an afternoon. They make wonderful handmade gifts for birthdays, holidays, or just because.

If you are making bracelets with children, start with the basic three-strand braid using thicker strips — the chunky size makes it easier for small hands to manage, and the results are still beautiful.

Finally, do not limit yourself to bracelets. The same techniques work for anklets, chokers, bag charms, and keyrings. Once you have the basic skills, you will find yourself looking at every old t-shirt as potential material.


A Note on Caring for Your T-shirt Yarn Bracelets

Because your bracelet is made from cotton jersey, it is actually quite washable. You can hand wash it gently in cool water with a mild detergent, rinse well, and lay it flat to dry. Avoid wringing or twisting the bracelet, which can distort the shape of the knots. Keep it away from prolonged soaking in chlorinated water, which can fade the colours over time.

With a little care, a well-made t-shirt yarn bracelet can last for years. And when it finally starts to look a little tired, you can always unravel it and use the yarn again for something new.


There is a real joy in making something beautiful from something that was otherwise destined to be thrown away. T-shirt yarn bracelets sit at that lovely intersection of creativity, sustainability, and personal expression, and once you start making them, it is genuinely difficult to stop. Start with one braid, then try a square knot, then experiment with colour patterns, and before long you will have a whole collection of colourful handmade bracelets that reflect exactly who you are. Happy crafting.

Categorized in:

Bracelet,

Last Update: November 5, 2026