Ripple and Ridge Afghan Blanket Free Knitting Pattern and Video

Ripple and Ridge Afghan Blanket: Free Knitting Pattern with Step-by-Step Video Guide

There is something deeply satisfying about watching a blanket grow row by row from a single skein of yarn. The Ripple and Ridge Afghan is one of those projects that manages to feel both classic and fresh at the same time — a timeless wave design combined with the satisfying texture of raised ridges that catch the light and add dimension to every inch of fabric. Whether you are a seasoned knitter looking for a meditative weekend project or an adventurous beginner ready to level up your skills, this free pattern is going to become one of your all-time favorites.

In this post, I am sharing the complete free knitting pattern for the Ripple and Ridge Afghan Blanket, along with tips on yarn selection, gauge, finishing, and everything in between. I have also put together a full video tutorial that walks you through every step, so you can pause, rewind, and knit along at your own pace.

Let’s get started.


What Makes the Ripple and Ridge Afghan So Special

The ripple stitch has been a staple of blanket knitting for generations, and for good reason. The gentle undulating waves create a visual rhythm that is pleasing to the eye without being overwhelming. When you combine those waves with periodic ridge rows — created by purling across on the right side — you get a two-dimensional texture that elevates the whole project from pretty to truly beautiful.

What I love most about this afghan is how it looks complicated but is actually built on a small, repeating stitch pattern that you will memorize after just a few rows. Once the rhythm is in your hands, you can knit while watching a movie, sitting outside, or catching up on a podcast. It becomes almost meditative. And the finished result? A full-sized throw blanket that looks like something you would find in a high-end home décor shop, made entirely by your own hands.

This pattern is written for a throw-sized blanket, approximately 50 inches wide by 60 inches long. You can easily scale it up or down by adjusting your cast-on number, which I will explain in detail below.


Materials You Will Need

Before you cast on, let’s talk about what you need to gather.

Yarn: You will need approximately 1,400 yards of a worsted weight yarn (also labeled as #4 medium weight). I recommend choosing a yarn with some natural fiber content — wool or a wool blend works beautifully for this pattern because it has natural elasticity that makes the ripple stitches pop. That said, an acrylic or acrylic blend is a perfectly wonderful choice, especially if the blanket is intended as a gift or for everyday use, since these are machine washable and hold their color beautifully over time. Some of my favorite yarns for this project include Lion Brand Wool-Ease, Paintbox Simply DK (knit at a slightly smaller gauge), Cascade 220, and Caron Simply Soft.

For a more luxurious feel, try a merino wool or a merino-acrylic blend. The drape and softness will take this blanket to another level entirely.

Needles: US size 8 (5.0mm) straight or circular needles. I strongly recommend using circular needles even when working flat, as this project involves a large number of stitches and the cable on circular needles gives your work room to spread out comfortably. There is nothing worse than stitches falling off the end of straight needles when you are deep in a row!

Other Supplies: A tapestry needle for weaving in ends, scissors, stitch markers (optional but helpful), and a tape measure.


Gauge

Gauge: 18 stitches and 24 rows = 4 inches in stockinette stitch on US size 8 needles.

Gauge is always important, but for a blanket project it is more forgiving than, say, a fitted garment. Even so, I encourage you to knit a gauge swatch before beginning. If your swatch is coming out larger than the gauge listed above (meaning your stitches are bigger and looser), try going down a needle size. If your swatch is coming out smaller (stitches are tighter and denser), go up a needle size.

A blanket that is a couple of inches larger or smaller than the listed dimensions is absolutely fine. The stitch pattern will still look gorgeous regardless.


Understanding the Ripple Stitch

The ripple effect in this pattern is created by a combination of increases and decreases worked in a specific sequence across the row. Essentially, you knit a series of decreases (knit two together, or k2tog) that pull the fabric inward, followed by a series of increases (yarn over, or yo) that push it outward. When this is worked consistently, the fabric takes on that characteristic wave shape.

The ridge rows are even simpler — you purl across the right side of the work at set intervals. Since the rest of the pattern is worked in stockinette (knit on the right side, purl on the wrong side), a purl row on the right side creates a horizontal ridge of bumps that sits up from the surface of the fabric. These ridges serve two purposes: they add beautiful visual interest, and they also help anchor the ripple waves so the blanket lies nice and flat.

If you are new to yarn overs or k2tog, do not worry at all. Both of these techniques are beginner-friendly once you have seen them demonstrated, and I cover both thoroughly in the video tutorial.


Abbreviations Used in This Pattern

Here is a quick reference for the abbreviations you will encounter:

CO — cast on. K — knit. P — purl. K2tog — knit two stitches together (a right-leaning decrease). SSK — slip, slip, knit (a left-leaning decrease). YO — yarn over (creates a new stitch and a small eyelet). RS — right side. WS — wrong side. Rep — repeat. St(s) — stitch(es). PM — place marker. SM — slip marker.


The Free Pattern

Cast On: Using the long-tail cast on method, cast on 227 stitches. This gives you a stitch count that accommodates the 22-stitch ripple repeat (10 repeats) plus 7 edge stitches.

If you want to adjust the width of your blanket, the repeat for this pattern is 22 stitches. Add or subtract multiples of 22 from the cast-on number, keeping the 7 extra edge stitches the same.

Setup Row (WS): Purl across all stitches.

Ripple Section (work until blanket measures approximately 58 inches from cast on, ending with a WS row):

Row 1 (RS — Ripple Row): K3, k2tog, k3, yo, k1, yo, k3, ssk, k1; rep from to last 4 sts, k4.

Row 2 (WS): P3, p2tog tbl, p3, yo, p1, yo, p3, p2tog, p1; rep from to last 4 sts, p4. (Note: If you prefer a simpler wrong-side row, you may substitute “purl across all stitches” for Row 2. The ripple effect will be slightly less pronounced but still beautiful, and many knitters find this easier to maintain.)

Row 3 (RS — Ridge Row): Purl across all stitches.

Row 4 (WS): Purl across all stitches.

These four rows form the complete pattern repeat. Continue working Rows 1 through 4 until your blanket measures approximately 58 to 60 inches from the cast-on edge, or until you have reached your desired length.

Bind Off: On a RS row, bind off all stitches loosely in knit. I recommend using a larger needle (one or two sizes up from your working needle) for the bind off to ensure the edge stays stretchy and does not pucker.


Edge Stitches and Keeping Your Edges Tidy

One of the things that can make or break the look of a finished knitted blanket is the neatness of the side edges. Here is a simple trick: slip the first stitch of every row purlwise with the yarn held to the front, then bring the yarn to the back and continue knitting the row as written. This creates a neat, chained edge along both sides of your blanket that looks intentional and polished. It also makes it easier to pick up stitches later if you decide to add a border.

Speaking of borders — this pattern looks wonderful with a simple garter stitch border worked around all four sides after the main body is complete. Simply pick up stitches around the entire perimeter and work 6 to 8 rows of garter stitch (knit every row), then bind off. This frames the ripple pattern beautifully and gives the blanket a finished, heirloom quality.


Color Ideas and Yarn Substitutions

One of the most exciting parts of any blanket project is choosing your colors. This pattern works beautifully in a single solid color — the textured ridges and ripples create enough visual interest on their own that you do not need multiple colors to make it eye-catching. A deep jewel tone like sapphire blue, forest green, or burgundy is absolutely stunning, as is a soft neutral like oatmeal, cream, or stone gray.

That said, if you want to play with color, this pattern rewards you generously. You can change colors every four rows (at the beginning of a new pattern repeat) for a striped ripple effect. The ridges naturally emphasize color changes, so stripes look crisp and intentional even with very simple color switching. You can also use a self-striping or gradient yarn and let the color do all the work for you while you focus on the stitch pattern.

For a truly showstopping blanket, consider using two or three colors in a planned sequence — for example, alternating between a warm rust, a creamy white, and a deep teal. Work two full pattern repeats in each color before switching, and you will end up with a bold, graphic blanket that looks like it came from a boutique shop.

When substituting yarns, always aim for a similar fiber weight and check your gauge. If you fall in love with a DK weight yarn, you can still use this pattern — just swatch carefully, and be prepared to adjust your needle size and possibly your cast-on number to achieve the dimensions you want.


Tips for Keeping Your Place in the Pattern

Because this pattern involves a four-row repeat with different actions on each row, it can be helpful to use a simple row counter or tally marks on a sticky note to track where you are. Many knitters also use stitch markers placed every 22 stitches across the row to help keep track of the ripple repeats. If you lose your place and cannot figure out where you are in the pattern, look at your fabric — if you can see the most recent ridge row, count the rows above it. One row above the ridge means you work Row 1 next; two rows above means Row 2 next, and so on.

If you notice that your ripple waves are starting to look uneven or the stitch count is off, the most common culprit is a missed yarn over. The yarn over creates a new stitch, and if you skip it, your row will be one stitch short per repeat. Count your stitches at the end of every right-side row until the pattern feels comfortable and automatic.


Caring for Your Finished Blanket

How you care for your finished blanket depends entirely on the yarn you chose. Always follow the care instructions on your yarn label. For most wool or wool-blend blankets, hand washing in cool water with a gentle wool wash, then pressing out excess water in a towel and laying flat to dry, is the safest approach. For acrylic or acrylic-blend blankets, machine washing on a gentle cycle in cool water is generally fine — but avoid high heat in the dryer, as this can cause acrylic fibers to pill or lose their softness.

Blocking your finished blanket before use is highly recommended. Wet blocking — soaking the blanket in cool water, gently pressing out the water, and then pinning it to the correct dimensions while it dries — opens up the stitch pattern beautifully and encourages the ripple waves to lie flat and even. The difference between a blocked and unblocked knitted blanket is remarkable, and this one extra step will make your finished project look truly professional.


Frequently Asked Questions

Can I knit this pattern as a beginner? Yes, with some caveats. If you are comfortable with knit and purl stitches, this is a wonderful next step. You will learn yarn overs and decreases along the way, and both are explained thoroughly in the video. If you have never knitted before at all, I would suggest practicing with a simple garter stitch or stockinette swatch first before jumping into this project.

How long will this take to knit? This really depends on how much time you can dedicate to it. For an average knitter working an hour or two per day, expect to spend four to six weeks on a full throw-sized blanket. It is a wonderful project to stretch out over a season.

Can I use this pattern to make a baby blanket? Absolutely. Simply cast on 111 stitches (five pattern repeats plus the 7 edge stitches) and work to approximately 36 inches in length. A soft, machine-washable acrylic or superwash wool is the ideal choice for little ones.

Is there a video tutorial available? Yes! I have created a full step-by-step video tutorial to accompany this pattern. In the video, I walk through the cast on, demonstrate each row of the pattern repeat in real time, show you how to change colors cleanly if you want to add stripes, and cover the bind off and finishing steps. You can find the video linked at the top of this post. If you knit along and share your finished blanket, I would love to see it — tag me on social media or drop a photo in the comments below.


A Few Final Thoughts

The Ripple and Ridge Afghan is one of those patterns that stays with you. Long after the project is finished, you will find yourself reaching for it as a gift for a new baby, a housewarming present, or a cozy addition to your own living room. The combination of a timeless ripple design and tactile ridge texture means this blanket never goes out of style, and because the pattern repeat is so straightforward, you can adapt it endlessly — in different yarns, different colors, different scales — and it will always feel brand new.

I hope you love knitting this as much as I loved designing it. Take your time, enjoy the process, and remember that every single stitch is made by your hands. That is something no store-bought blanket can ever replicate.

Happy knitting.


If you found this pattern helpful, please share it with a fellow knitter, pin it to your favorite knitting board on Pinterest, or leave a comment below with questions. I read every single one. And if you are working through the video tutorial and get stuck anywhere, just let me know — I am always happy to help.

Categorized in:

Blankets,

Last Update: August 16, 2026