Halloween Pumpkin Amigurumi Crochet Pattern with Step-by-Step Photos

Halloween Pumpkin Amigurumi Crochet Pattern with Step-by-Step Photos

Autumn is in the air, leaves are turning brilliant shades of orange and red, and that can only mean one thing: Halloween is just around the corner. If you love adding handmade touches to your holiday décor — or if you’re looking for the perfect spooky-season gift — this Halloween Pumpkin Amigurumi Crochet Pattern is exactly what you need. Whether you’re a seasoned crocheter or someone who has recently discovered the delightful world of amigurumi, this step-by-step tutorial will guide you through creating an adorable stuffed pumpkin that will look charming on your mantle, your desk, or nestled among your Halloween decorations for years to come.

Amigurumi (the Japanese art of knitting or crocheting small stuffed animals and figures) has taken the crafting world by storm, and for good reason. These little creations are endlessly customizable, satisfying to make, and genuinely impressive to display or give as gifts. A pumpkin is one of the most iconic shapes of the season, and when you combine it with amigurumi techniques, the result is a squishy, lovable, perfectly round little gourd that everyone will want to touch and squeeze.

Let’s dive in.


What You’ll Need: Materials and Tools

Before you pick up your hook, gather everything you need so the process flows smoothly. Having your materials ready makes the experience far more enjoyable, especially when you’re working in the round and don’t want to lose your place.

Yarn: You’ll need worsted weight (size 4) yarn in orange for the pumpkin body. For the stem, you’ll want a small amount of brown or dark green yarn. If you’d like to add a face, have black yarn on hand, or use black felt and fabric glue as an alternative. A small amount of green yarn works beautifully for a curly vine.

Crochet Hook: A 3.5mm or 4.0mm hook is ideal for worsted weight yarn when making amigurumi. Using a hook slightly smaller than the yarn label suggests creates tighter stitches that keep the stuffing from showing through.

Stuffing: Polyester fiberfill stuffing is the standard for amigurumi. Stuff your pumpkin firmly for the best shape.

Eyes: 12mm or 15mm safety eyes work wonderfully for a cute, wide-eyed pumpkin face. If you’re making this for a small child, skip the safety eyes and embroider the eyes with yarn instead.

Stitch Marker: This is non-negotiable when working in the round. A simple locking stitch marker or even a piece of contrasting yarn will save you so much confusion.

Yarn Needle: A blunt-tipped tapestry needle for sewing pieces together and weaving in ends.

Scissors.

Optional: Orange pipe cleaners to shape the vine, or green chenille wire.


Understanding Amigurumi Basics

If this is your first amigurumi project, a few concepts will make everything click. Amigurumi is worked almost entirely in continuous rounds (also called the spiral method), meaning you do not join rounds with a slip stitch or chain up at the beginning of each round the way you might in other crochet projects. Instead, you simply keep going in a continuous spiral, moving your stitch marker up with each new round so you always know where one round ends and the next begins.

The magic ring (also called a magic circle or adjustable ring) is your starting point for almost every amigurumi piece. It allows you to begin with a tightly closed center so there’s no hole at the top of your pumpkin. If you haven’t used a magic ring before, it’s worth practicing a few times before you start — it becomes second nature within a couple of tries.

All stitches in this pattern are US crochet terms. The primary stitch is the single crochet (sc). You’ll also use increases (working two single crochets into one stitch) and decreases (the invisible decrease, where you insert your hook through the front loops of two consecutive stitches and complete the single crochet as normal, is the neatest option).

Abbreviations used in this pattern:

MR — magic ring, sc — single crochet, inc — increase (2 sc in same stitch), dec — invisible decrease, st — stitch, sl st — slip stitch, ch — chain, BLO — back loop only, FLO — front loop only.


The Pumpkin Body

Round 1: Make a magic ring and work 6 sc into the ring. Pull the tail to close the ring. Place your stitch marker in the last stitch. (6 sts)

Round 2: Inc in each st around. (12 sts)

Round 3: Sc 1, inc repeat around. (18 sts)

Round 4: Sc 2, inc repeat around. (24 sts)

Round 5: Sc 3, inc repeat around. (30 sts)

Round 6: Sc 4, inc repeat around. (36 sts)

Round 7: Sc 5, inc repeat around. (42 sts)

Round 8: Sc 6, inc repeat around. (48 sts)

Rounds 9–16: Sc in each st around. (48 sts) — 8 rounds even.

Round 17: Sc 6, dec repeat around. (42 sts)

Round 18: Sc 5, dec repeat around. (36 sts)

Round 19: Sc in each st around. (36 sts)

Round 20: Sc 4, dec repeat around. (30 sts)

Round 21: Sc in each st around. (30 sts)

Round 22: Sc 3, dec repeat around. (24 sts)

Before you close up the pumpkin, this is the moment to insert your safety eyes if you’re using them. The eyes look best placed between rounds 12 and 13, spaced about 8–10 stitches apart depending on the size of your eyes and the look you’re going for. Once the safety eyes are secured on the inside with their washers, you can begin stuffing.

Stuff your pumpkin firmly now. Use small pieces of fiberfill rather than one large chunk — this helps fill every corner and creates a rounder shape. Keep adding stuffing as you close the remaining rounds.

Round 23: Sc 2, dec repeat around. (18 sts)

Round 24: Sc 1, dec repeat around. (12 sts)

Round 25: Dec around. (6 sts)

Add any final stuffing needed, then fasten off, leaving a tail. Use your yarn needle to weave through the front loops of the remaining 6 stitches, pull tight to close the hole, and weave in the end securely on the inside.


Creating the Pumpkin Ridges

One of the most satisfying parts of making a pumpkin amigurumi is adding the ridges that give it that classic pumpkin silhouette. There are two popular methods, and either works beautifully.

Method 1 — Surface Slip Stitch: Thread your yarn needle with a long piece of orange yarn (or a slightly darker shade of orange for contrast and definition). Insert the needle from the bottom of the pumpkin to the top, pulling the yarn through the center. As you bring the needle back down, work it slightly to one side of center. Each time you pull the yarn snugly, it creates an indent that divides the pumpkin into sections. Aim for 6 sections total, working evenly around the body. Secure the ends inside the pumpkin.

Method 2 — Crocheted Ridges: With your pumpkin body complete, use a slip stitch worked along vertical surface rows from bottom to top of the pumpkin. This takes more time but creates very defined, raised ridges. Use a slightly darker orange or even a rust-toned yarn to make the ridges pop visually.

For photo purposes (and for the most satisfying result), Method 1 is quicker and gives a lovely, soft-sectioned look that photographs beautifully.


The Stem

Using brown or dark green yarn and your 3.5mm hook:

Round 1: MR, 4 sc into ring. (4 sts)

Rounds 2–6: Sc in each st around. (4 sts)

You can stuff the stem lightly or leave it unstuffed — both work. Fasten off, leaving a long tail for sewing. Flatten the bottom opening slightly and use your yarn needle to sew the stem to the top center of the pumpkin, right where the ridge indentations meet. Secure it firmly and weave in all ends.


The Curly Vine

This little detail elevates the whole project. Cut a length of green yarn (about 12 inches). Using your yarn needle, thread it through the base of the stem and secure it with a knot. Then, using your crochet hook and a slip stitch or chain method, crochet a short chain of about 10–15 chains. When you fasten off and release the tension, the chain will naturally curl into a tendril-like vine. You can wrap it gently around a pencil to encourage the curl, then release it. Secure the end to the pumpkin body near the stem.

For a more dimensional vine, try working the chain over a piece of green pipe cleaner or floral wire, which lets you shape it however you like after the fact.


Adding the Jack-o’-Lantern Face (Optional)

If you want your pumpkin to look like a classic jack-o’-lantern rather than a plain decorative gourd, the face is where the personality really shines through. Here are several options depending on your skill level and the look you’re going for.

Safety Eyes Only: A pair of wide safety eyes gives the pumpkin an innocent, kawaii expression that’s particularly charming. You can combine eyes with a small embroidered smile using black yarn.

Embroidered Face: Using black yarn and a yarn needle, embroider classic triangle eyes, a triangle nose, and a jagged smile directly onto the front of the pumpkin. This is the safest option for children’s toys since there are no parts that can be pulled off.

Felt Face: Cut eye, nose, and mouth shapes from black felt and attach them with fabric glue or a few tiny stitches around the edges. This method gives the crispest, most graphic look and is particularly photogenic. Triangle eyes, a small diamond nose, and a wide toothy grin made of alternating rectangles look wonderful on a round pumpkin body.

Buttons: Small black buttons can be sewn on for eyes, though again, avoid this option for toys intended for small children.


Finishing Touches and Styling Tips

Once all your pieces are assembled and all ends are woven in, give your pumpkin a gentle squeeze and reshape it if needed. If your pumpkin looks a little deflated or lumpy, you can carefully open the small closing hole at the bottom, add more fiberfill, and re-close it.

For display, consider making a small cluster of three pumpkins in different sizes — a large one (following this pattern as written), a medium one (reduce the increases by one round so you stop at 42 stitches maximum and work fewer even rounds), and a tiny one (stop increasing at 30 stitches and work just 3 or 4 even rounds). Grouped together, they look absolutely stunning as a Halloween centerpiece.

Style your pumpkins among dried leaves, sprigs of eucalyptus, mini gourds, or battery-operated fairy lights. They photograph beautifully in natural light near a window, especially with autumn foliage in the background.


Customization Ideas

One of the best things about this pattern is how easily it adapts to different aesthetics. Here are some ideas to make your pumpkin uniquely yours.

A deep burgundy or dusty purple pumpkin instantly feels more sophisticated and witchy. Add a small black ribbon bow at the base of the stem for a gothic touch. A glittery yarn held alongside your regular yarn adds a magical shimmer. White or pale grey yarn creates a ghost pumpkin that looks beautiful alongside traditional orange ones. For a truly spooky set, make one pumpkin with a screaming face, one with a classic jack-o’-lantern grin, and one with simple dot eyes and a curved smile.

You can also add a small hanging loop at the top of the stem using a chain of 10 stitches joined into a ring, turning your amigurumi pumpkin into a charming ornament for a Halloween tree.


Gauge and Sizing

Using worsted weight yarn and a 3.5mm hook, the finished pumpkin measures approximately 4 inches tall (not including the stem) and about 5 inches wide at its widest point. If you want a larger pumpkin, go up in yarn weight to bulky (size 5 or 6) and adjust your hook accordingly. A chunky pumpkin worked in bulky yarn will come out roughly twice the size and works up incredibly fast — perfect for a last-minute Halloween project.


Troubleshooting Common Issues

If your pumpkin comes out looking more like a ball than a pumpkin, the ridge work is the key — don’t skip it. Even light indentations make a dramatic difference in giving the shape those characteristic lobes.

If your stitches look loose or you can see the stuffing through them, switch to a smaller hook. Tight, even stitches are the hallmark of well-made amigurumi and they also help the finished piece hold its shape over time.

If your magic ring keeps coming undone, try working the first few rounds before pulling the tail tight. Some crafters also add a small dab of fabric glue to the knot for extra security, though this is rarely necessary once you get the technique down.

If your safety eyes keep popping out, make sure the washer is fully snapped onto the post. It should take real effort to remove it — if the washer slides on and off easily, the washer may be the wrong size for the eye post.


A Note on Yarn Substitutions

This pattern works with any worsted weight yarn, so use whatever you have on hand or whatever fits your budget. Acrylic yarn is the most practical choice for amigurumi because it’s washable, colorfast, affordable, and comes in an enormous range of colors. Cotton yarn gives a slightly stiffer, more structured result that some crafters prefer for display pieces. Wool yarn creates a gorgeous, slightly rustic texture but requires more careful care.

If you plan to give this pumpkin to a child, choose a machine-washable yarn (most standard acrylics qualify) and double-check that all safety eyes are very securely attached — or embroider the face entirely.


Share Your Makes

If you crochet this Halloween Pumpkin Amigurumi, please share your finished piece! Post your photos, tag your project, and let the crafting community see your creative spin on this pattern. Whether you stick to classic orange or go full gothic with black and purple, every pumpkin turns out with its own personality, and that’s one of the most wonderful things about handmade items. No two are ever exactly alike.

This pattern is beginner-friendly with just a little practice, makes a beautiful autumn decoration, works up in just a few hours, and costs very little in materials — which makes it one of those rare projects that checks every single box. Happy crocheting, and Happy Halloween!

Categorized in:

Amigurumi,

Last Update: November 7, 2026