Flip Flop Raccoon | Free Crochet Pattern – Darling Maple Designs

Flip Flop Raccoon | Free Crochet Pattern

If you’ve been searching for a crochet project that combines adorable woodland charm with just the right amount of quirky personality, you’ve landed in exactly the right place. This Flip Flop Raccoon crochet pattern is one of those designs that makes you smile the moment you finish it — a chubby little critter in tiny sandals, ready to lounge the summer away. Whether you’re a seasoned crocheter looking for a fun amigurumi project or an intermediate crafter ready to level up, this free pattern from Darling Maple Designs has everything you need to create your new favorite desk companion, nursery decoration, or handmade gift.

Let’s dive into everything — the materials, the stitches, the step-by-step instructions, and all the little tips that make the difference between a good finished piece and a great one.


Why You’ll Love This Raccoon Crochet Pattern

Raccoons are having a moment, and honestly, they deserve it. With their masked faces, ringed tails, and generally mischievous energy, they translate beautifully into amigurumi form. But what makes this particular pattern special is the addition of the flip flops. It’s a tiny, unexpected detail that gives this raccoon a full personality — the kind of guy who’s perpetually on vacation, completely unbothered, living his best life.

Beyond the cuteness factor, this pattern is designed to be genuinely accessible. The construction follows a logical order so you’re never confused about what connects where. Each piece is worked in the round using standard amigurumi techniques, and the color changes are manageable even if you haven’t done much colorwork before. The finished raccoon stands about six to seven inches tall depending on your yarn weight and tension, making it a satisfying size — substantial enough to display proudly but compact enough to tuck into a gift bag.


Materials You’ll Need

Before you cast on a single stitch, gather your supplies. Having everything within reach before you start will keep your workflow smooth and your frustration levels low.

Yarn: You’ll need a worsted weight yarn in the following colors — medium gray, dark gray or charcoal, off-white or cream, and black. For the flip flops, choose two contrasting colors. Classic combinations include turquoise and yellow, coral and mint, or red and white, but truly any cheerful pairing works. If you want a more natural look, you can use tan or earthy tones instead.

Hook: A 3.5mm crochet hook is recommended for most worsted weight yarns to achieve a tight enough gauge to prevent stuffing from showing through. If your stitches tend to run loose, drop down to a 3.25mm. If they run tight, go up to a 3.75mm.

Other supplies: Polyester fiberfill stuffing, two 12mm safety eyes (black), a yarn needle for sewing pieces together, stitch markers, scissors, and black embroidery floss or black yarn for the nose and facial details.

Optional: If you’re making this for a child under three years old, skip the safety eyes and embroider the eyes instead using black yarn or embroidery floss. Safety is always the priority with handmade toys for little ones.


Abbreviations and Stitch Guide

This pattern uses standard US crochet terminology. Here’s a quick reference for the stitches you’ll encounter throughout.

MR — Magic ring (also called a magic circle)
ch — Chain
sl st — Slip stitch
sc — Single crochet
inc — Increase (two single crochets in the same stitch)
dec — Invisible decrease (insert hook through front loops of the next two stitches, yarn over and pull through both loops, then yarn over and pull through the remaining two loops)
BLO — Back loop only
FLO — Front loop only
st(s) — Stitch(es)
rnd — Round
[ ] — Repeat the instructions within brackets the number of times indicated

All pieces are worked in continuous rounds unless otherwise noted. Use a stitch marker to mark the beginning of each round so you always know where you are.


Pattern Notes

A few things to keep in mind before you begin. First, stuff your pieces as you go rather than waiting until the end. Gradually adding fiberfill as the opening closes makes it much easier to get an even, smooth result. Second, leave long tails when you fasten off each piece — these tails are what you’ll use to sew pieces together, so you won’t need to attach new lengths of yarn for every join. Third, the invisible decrease is strongly recommended over a standard decrease for amigurumi. It creates a smoother surface and reduces the little gaps that can form with the standard method.

The flip flops are worked flat rather than in the round, so pay attention to those sections and turn your work at the end of each row as indicated.


The Pattern

Head

Using medium gray yarn, begin with a magic ring.

Rnd 1: 6 sc in MR (6 sts)
Rnd 2: [inc] x6 (12 sts)
Rnd 3: [sc, inc] x6 (18 sts)
Rnd 4: [sc 2, inc] x6 (24 sts)
Rnd 5: [sc 3, inc] x6 (30 sts)
Rnd 6: [sc 4, inc] x6 (36 sts)
Rnd 7: [sc 5, inc] x6 (42 sts)
Rnds 8–14: sc around (42 sts, 7 rounds)
Rnd 15: [sc 5, dec] x6 (36 sts)
Rnd 16: [sc 4, dec] x6 (30 sts)

At this point, insert the safety eyes between rounds 10 and 11, placing them approximately 8 stitches apart. Before fully securing the eyes, hold the head up and take a moment to assess the placement — eyes placed just a touch closer together tend to look more endearing, while wider placement looks more realistic. Either works beautifully, so go with what speaks to you.

Rnd 17: [sc 3, dec] x6 (24 sts)
Rnd 18: [sc 2, dec] x6 (18 sts)

Begin stuffing the head firmly at this point. Continue adding stuffing gradually as you close the piece.

Rnd 19: [sc, dec] x6 (12 sts)
Rnd 20: [dec] x6 (6 sts)

Fasten off and close the remaining hole by weaving the yarn tail through the front loops of the 6 remaining stitches and pulling tight. Weave in this end securely.


Mask (Eye Patch)

The raccoon’s signature mask is worked flat in black yarn and then sewn onto the face over the eye placement.

Using black yarn, ch 14.
Row 1: sc in 2nd ch from hook, sc across (13 sts), ch 1, turn
Row 2: inc, sc 4, inc, sc, inc, sc 4, inc (17 sts), ch 1, turn
Row 3: sc across (17 sts), ch 1, turn
Row 4: sc 3, dec, sc 7, dec, sc 3 (15 sts), ch 1, turn
Row 5: sc across (15 sts)

Fasten off, leaving a long tail for sewing. The mask should curve naturally around the eye area. Pin it in place before sewing to make sure the safety eyes peek through the center of the mask properly. Sew the mask to the head using small, neat stitches that follow the edge of the black piece, pulling slightly to help it conform to the curve of the head.


Muzzle

Using off-white or cream yarn, begin with a magic ring.

Rnd 1: 6 sc in MR (6 sts)
Rnd 2: [inc] x6 (12 sts)
Rnd 3: [sc, inc] x6 (18 sts)
Rnds 4–5: sc around (18 sts)

Fasten off, leaving a long tail. Do not stuff the muzzle — it should lay flat against the face. Sew it centered below the eyes, aligning it with the lower portion of the mask. Once it’s sewn on, use black embroidery floss or black yarn to embroider a small upside-down triangle for the nose at the top center of the muzzle, and a small curved line below it for the mouth. These tiny details bring the whole face to life.


Ears (Make 2)

For each ear, you’ll work a small piece in medium gray with an inner ear detail in cream.

Outer ear (medium gray):
Rnd 1: 6 sc in MR (6 sts)
Rnd 2: [inc] x6 (12 sts)
Rnd 3: [sc, inc] x6 (18 sts)
Rnds 4–5: sc around (18 sts)

Inner ear (cream):
Rnd 1: 6 sc in MR (6 sts)
Rnd 2: [inc] x6 (12 sts)
Rnd 3: [sc, inc] x6 (18 sts)

Fasten off the inner ear piece and sew it to the front surface of the outer ear, centering it carefully. Then fold the outer ear in half (so the inner ear faces outward) and flatten it — do not stuff the ears. Sew across the open edge to hold the shape, then sew each ear to the top of the head, positioning them toward the sides.


Body

Using medium gray yarn, begin with a magic ring.

Rnd 1: 6 sc in MR (6 sts)
Rnd 2: [inc] x6 (12 sts)
Rnd 3: [sc, inc] x6 (18 sts)
Rnd 4: [sc 2, inc] x6 (24 sts)
Rnd 5: [sc 3, inc] x6 (30 sts)
Rnd 6: [sc 4, inc] x6 (36 sts)
Rnds 7–16: sc around (36 sts, 10 rounds)
Rnd 17: [sc 4, dec] x6 (30 sts)
Rnd 18: [sc 3, dec] x6 (24 sts)
Rnd 19: [sc 2, dec] x6 (18 sts)

Begin stuffing. Pack it firmly for a nice round shape.

Rnd 20: [sc, dec] x6 (12 sts)
Rnd 21: [dec] x6 (6 sts)

Fasten off and close as with the head. Set the body aside.


Arms (Make 2)

Using medium gray yarn, begin with a magic ring.

Rnd 1: 6 sc in MR (6 sts)
Rnd 2: [inc] x6 (12 sts)
Rnds 3–12: sc around (12 sts, 10 rounds)

Stuff lightly — arms should have some structure but not be overly firm. Flatten the open end and sew it closed. Sew the arms to the sides of the body, positioning them at about one third of the way down from the top of the body.


Legs (Make 2)

Using medium gray yarn, begin with a magic ring.

Rnd 1: 6 sc in MR (6 sts)
Rnd 2: [inc] x6 (12 sts)
Rnds 3–10: sc around (12 sts, 8 rounds)

Stuff firmly. Flatten and sew closed. Attach to the bottom front of the body, facing forward.


Tail

The tail is one of the most satisfying pieces of this whole pattern. You’ll work alternating stripes of medium gray and dark gray or black to create that classic ringed raccoon look.

Using dark gray yarn, begin with a magic ring.

Rnd 1: 6 sc in MR (6 sts)
Rnd 2: [inc] x6 (12 sts)
Rnd 3: [sc, inc] x6 (18 sts)

Switch to medium gray.

Rnds 4–5: sc around (18 sts)

Switch to dark gray.

Rnds 6–7: sc around (18 sts)

Continue alternating between medium gray and dark gray every two rounds for a total of about 8–10 rounds of stripes, or until your tail reaches a length you’re happy with. When you’re ready to close, decrease as follows:

Next rnd: [sc, dec] x6 (12 sts)
Following rnd: [dec] x6 (6 sts)

Stuff the tail as you go. Fasten off and close. Sew the tail to the back center of the body, angling it upward slightly so it curves naturally away from the body.


Flip Flops (Make 2)

Now for the most delightful part of this whole pattern — the tiny flip flops. Each one consists of a sole and a strap, and together they take maybe 20 minutes to make. That 20 minutes is absolutely worth it.

Sole:

Using your first flip flop color, ch 8.

Rnd 1: sc in 2nd ch from hook, sc 5, 3 sc in last ch; working along opposite side of chain, sc 5, 2 sc in first ch, sl st to join (18 sts)
Rnd 2: ch 1, inc, sc 5, inc 3, sc 5, inc 2, sl st to join (24 sts)
Rnd 3: ch 1, sc 8, inc 4, sc 8, inc 4, sl st to join (32 sts)

Fasten off, leaving a long tail.

Strap:

Using your second flip flop color, ch 10. Sc in 2nd ch from hook and across (9 sts). Fasten off with a long tail.

Fold the strap into a V shape and sew the two ends to the sides of the sole at about the midpoint, then attach the top of the V slightly higher toward the toe end of the sole. The strap will create that classic thong sandal silhouette. Sew the finished flip flops to the bottom of each leg.


Assembly

Now that all your pieces are complete, it’s time to bring your raccoon to life. Start by sewing the head firmly to the top of the body. Make sure the face is pointing straight forward and that the seam is hidden by working your stitches through both the last round of the head and the first round of the body. Pull tightly and weave the tail through several times before trimming.

Attach the ears to the top of the head, checking that they’re symmetrical before committing to the final sewing. The arms go on the sides of the body and the tail goes centered on the back. Take your time with this step — assembly is what separates a polished finished piece from one that looks a little off.


Tips for the Best Results

The tighter your tension, the more professional your finished raccoon will look. Loose tension lets the white stuffing peek through, which distracts from the color details. If you’re struggling to achieve a tight enough gauge, try going down half a hook size.

When sewing pieces together, always pin first and step back to assess before you sew. The difference between well-placed ears and slightly misaligned ones is noticeable, and it’s much easier to repin than to rip out sewing.

For the face details, use a sharp yarn needle and take your time with the embroidered nose and mouth. Small, careful stitches look much cleaner than rushed ones.

If you want your raccoon to be poseable, you can insert pipe cleaners into the arms before sewing them closed. This lets you bend the arms into different positions and gives the finished piece an extra bit of playfulness.


Ideas for Customizing Your Raccoon

One of the best things about a free crochet pattern like this one is how easily you can make it your own. Here are a few ideas to spark your creativity.

You could give your raccoon a tiny accessory — a crocheted ice cream cone, a little flower, or even a miniature

Categorized in:

Amigurumi,

Last Update: October 1, 2026