![How to knit fingerless gloves for beginners – Step by step tutorial [+video] How to knit fingerless gloves for beginners – Step by step tutorial [+video]](https://i.pinimg.com/originals/3b/b6/9d/3bb69d35cef01aaf495f4a81e915c614.jpg)
How to Knit Fingerless Gloves for Beginners — Step by Step Tutorial [+Video]
Fingerless gloves are one of those knitting projects that feel impressive to wear and give away but are surprisingly approachable, even if you’re just getting started with needles and yarn. They keep your palms and wrists warm while leaving your fingers free for typing, texting, reading, or anything else you do with your hands all day long. And because they’re small and self-contained, they knit up relatively quickly — which means you get that satisfying “I made this” moment without committing to months of work.
This tutorial walks you through everything from choosing your yarn and needles to casting off your finished pair. We’ll go slowly, explain the stitches as we go, and give you troubleshooting tips for the parts that tend to trip beginners up. By the end, you’ll have a cozy, wearable pair of fingerless gloves and the confidence to knit them again and again.
What You’ll Need Before You Start
Before picking up your needles, gather your supplies. Having everything within reach makes the process much smoother.
Yarn: For a beginner-friendly experience, choose a worsted weight yarn (also labeled as “medium” or size 4 on the yarn label). Worsted weight is thick enough to work with comfortably but not so bulky that your gloves will feel stiff. A smooth yarn in a solid color is ideal when you’re learning because it makes it easy to see your stitches clearly. Something with a bit of stretch, like a wool or wool-blend yarn, will give your gloves the elasticity they need to fit well. You’ll need roughly 100–150 yards per pair, depending on hand size.
Needles: This pattern uses double-pointed needles (DPNs), which are short needles with points at both ends. They come in sets of four or five and allow you to knit in the round, which is how gloves are made. For worsted weight yarn, you’ll typically use US size 7 or 8 (4.5–5mm) needles. If you’ve never used DPNs before, don’t be intimidated — they look trickier than they are, and we’ll explain exactly how to use them.
Other supplies: You’ll need a tape measure, a yarn needle (also called a tapestry needle) for weaving in ends, stitch markers, and a small amount of scrap yarn or a stitch holder for the thumb opening. Scissors are always helpful to have nearby.
Understanding the Basic Stitches
Fingerless gloves use only two stitches: knit and purl. If you already know these, you’re ready to go. If not, here’s a quick refresher.
The knit stitch is the foundation of knitting. Insert your right needle into the front of the stitch on your left needle, from left to right. Wrap the working yarn counterclockwise around the right needle, then pull that loop through the stitch and slide the old stitch off the left needle. That’s one knit stitch.
The purl stitch is the reverse of the knit stitch. Bring your yarn to the front of your work. Insert your right needle into the front of the stitch on your left needle, from right to left. Wrap the yarn counterclockwise around the right needle, pull the loop through, and slide the old stitch off. That’s one purl stitch.
Knitting in the round on DPNs means you’re working in a continuous spiral rather than going back and forth in rows. The right side of your work always faces you, which makes reading your stitches easier and creates a seamless tube of fabric — perfect for gloves.
Ribbing is what creates the stretchy cuff at the wrist. It’s made by alternating knit and purl stitches in a pattern, most commonly “knit 2, purl 2” (written as K2, P2). This creates little vertical columns that have natural elasticity, so the cuff hugs your wrist comfortably.
Reading the Pattern
Knitting patterns use abbreviations to keep instructions concise. Here are the ones you’ll encounter in this tutorial:
CO = Cast on, K = Knit, P = Purl, K2tog = Knit two stitches together (a decrease), M1 = Make one (an increase), PM = Place marker, SM = Slip marker, RS = Right side, WS = Wrong side, Rep = Repeat, St(s) = Stitch(es), Rnd = Round.
The Pattern: Simple Beginner Fingerless Gloves
This pattern is written for a women’s medium hand. The finished glove will measure approximately 7.5 inches around the palm and 8 inches in length. For a larger hand, cast on 4–8 more stitches. For a smaller hand, cast on 4 fewer stitches.
Gauge
Before starting any knitting project, it’s worth knitting a gauge swatch. Cast on about 20 stitches and knit a 4-inch square in stockinette stitch (knit every round when working in the round). Measure how many stitches fit in 4 inches. For this pattern, you’re aiming for roughly 18 stitches over 4 inches. If your stitches are smaller and you have more per inch, go up a needle size. If your stitches are larger and you have fewer per inch, go down a needle size. Getting gauge right means your gloves will actually fit.
Step 1: Cast On and Divide Your Stitches
Using your DPNs and worsted weight yarn, cast on 36 stitches using a long-tail cast on. The long-tail cast on creates a sturdy, slightly elastic edge that works beautifully for the cuff of a glove.
To do a long-tail cast on, leave a tail of yarn about 18 inches long. Make a slip knot and place it on one needle. Hold the needle in your right hand. With your left hand, spread your thumb and index finger apart and hold both strands of yarn — the tail over your thumb and the working yarn over your index finger. Scoop the needle under the loop on your thumb, grab the yarn from your index finger, and pull it through the loop. Slip the loop off your thumb and gently tug the tail to tighten. That’s one stitch. Repeat until you have 36 stitches.
Now divide those 36 stitches across three DPNs: 12 stitches on the first needle, 12 on the second, and 12 on the third. The needles should form a triangle shape. Before you join to knit in the round, make sure your stitches aren’t twisted around the needles — all the cast-on edge should be along the inside of the triangle. Twisted stitches at the cast-on stage are the number one beginner mistake and they can’t be fixed later without ripping everything out.
Place a stitch marker on your right needle to mark the beginning of the round.
Step 2: Knit the Ribbed Cuff
Join to work in the round by knitting the first stitch of needle one. You’ll now work K2, P2 ribbing for approximately 2.5 inches, which comes to about 12 rounds.
Each round: K2, P2; repeat from to end of round.
When you reach the end of needle one, the fourth needle (the “free” needle) takes over the stitches from needle one as you work, and needle one becomes the new free needle. This is the rhythm of DPN knitting. It feels awkward for the first couple of rounds, and then it clicks.
Keep tension consistent as you move from one needle to the next. The join between needles is where many beginners accidentally create loose stitches, sometimes called “laddering.” To avoid this, give the first stitch on each new needle a slightly firmer tug than usual as you knit it.
After 12 rounds of ribbing, your cuff should look wonderfully stretchy with visible vertical ridges running up its length.
Step 3: Knit the Hand Portion
Switch to stockinette stitch, which in the round means you simply knit every stitch in every round. No purling needed. Knit for 6 rounds in plain stockinette.
Your glove is now a tidy tube with a ribbed cuff at the bottom and a smooth hand section growing above it.
Step 4: Create the Thumb Gusset
The thumb gusset is the part of the glove that creates the triangular section of fabric for your thumb. This is where a lot of beginners slow down and think carefully, which is exactly the right approach.
Round 1 (setup): Knit to the last 2 stitches of your round, PM (place a second marker to mark the gusset section), K2, PM, SM (slip the beginning of round marker). You’ve now marked off 2 stitches as the start of your gusset.
Round 2 (increase round): Knit to the first gusset marker, SM, M1L (make one left — insert your left needle from front to back under the bar between the last stitch and the next stitch, then knit through the back loop), knit the gusset stitches, M1R (make one right — insert your left needle from back to front under the bar between stitches, then knit through the front loop), SM, knit to end.
You now have 4 gusset stitches between your markers.
Round 3: Knit all stitches, slipping markers as you come to them.
Repeat Rounds 2 and 3 until you have 12 stitches between your gusset markers. You’ll do this increase every other round, so approximately 5 increase rounds total.
After the final increase round, work one plain round. Your gusset stitches are now ready to be placed on hold.
Step 5: Place Thumb Stitches on Hold
When you reach the gusset markers, slip the 12 gusset stitches onto a piece of scrap yarn or a stitch holder and remove the markers. Using the backward loop method (also called a thumb cast on), cast on 2 stitches over the gap. This keeps the thumb hole from having a loose, floppy edge.
To backward loop cast on: With your working yarn coming from the right needle, loop the yarn around your left thumb from front to back, and slide the needle under the loop. Remove your thumb and tighten. Repeat once more.
Join your round and continue knitting around with 36 stitches again (the 12 gusset stitches are now on hold and the 2 cast-on stitches have replaced them).
Step 6: Finish the Hand
Knit in plain stockinette for approximately 10 more rounds, or until the glove reaches just below your knuckles. Try it on as you go — every hand is slightly different, and the best measurement is your own.
Step 7: Knit the Upper Cuff or Finger Edge
Work 6 rounds of K2, P2 ribbing to create a tidy, stretchy edge just below the fingers. This matches your wrist cuff and gives the glove a finished, intentional look.
Bind off loosely using a stretchy bind-off method. A simple stretchy bind-off works like this: K2, then insert the left needle into the front of both stitches on the right needle and knit them together. K1, insert the left needle into the front of both stitches on the right needle and knit them together. Repeat from until all stitches are bound off. Keeping your tension loose during the bind-off is essential — if the edge feels tight when you try the glove on, it will be uncomfortable to wear.
Cut your yarn, leaving a 6-inch tail. Thread it through the final stitch with your yarn needle and pull tight to secure.
Step 8: Knit the Thumb
Transfer the 12 held thumb stitches from your scrap yarn back onto two DPNs. Pick up and knit 4 stitches along the cast-on edge at the top of the thumb opening (to close any gaps), and divide all stitches evenly across three needles. You should have approximately 16 stitches. Join to work in the round.
Knit every round in stockinette for 1 inch, or until the thumb tube reaches just below your first thumb knuckle.
Work 4 rounds of K2, P2 ribbing, then bind off loosely as before. Weave in the tail.
Step 9: Finishing
Now comes the most satisfying step: weaving in your ends. Thread each yarn tail onto your tapestry needle and weave it in and out through the stitches on the wrong side of the fabric, going in one direction and then doubling back slightly to lock it in place. Trim the excess, leaving a tiny tail. Do this for every tail — at the cast-on, at the thumb join, and at the bind-off.
If your gloves have any slight puckering or uneven stitches, wet blocking will smooth them out beautifully. Submerge your finished gloves in cool water for about 10 minutes, then gently squeeze out the water (don’t wring them) and lay them flat on a towel in the shape you want. Let them dry completely before wearing.
Troubleshooting Common Beginner Problems
Twisted stitches at cast-on: This only happens at the very beginning, before you’ve joined the round. If you notice it in the first round, the only fix is to rip back and start over. It’s better to catch it early.
Holes near the thumb opening: This is normal and fixable. When you pick up stitches for the thumb, pick up one or two extra stitches at the corners of the opening, then knit those extra stitches together with adjacent stitches on the first thumb round. This closes the gap cleanly.
Laddering between needles: Give the first stitch of each needle a firm, confident tug as you knit it. Some knitters also find that rearranging how many stitches sit on each needle (so needle changes don’t always fall in the same place) reduces laddering.
Gloves coming out too small or too big: This almost always comes down to gauge. If you skipped the gauge swatch, now you know why it matters. Next time, swatch first. In the meantime, you can try going up or down a needle size if the fit is way off.
Ribbing that feels too tight: You likely need to go up a needle size specifically for your ribbing rows, or simply consciously loosen your tension during those rounds.
Tips for Customizing Your Gloves
Once you’re comfortable with the basic pattern, the options for personalizing your gloves are endless. You can work the cuffs in a different stitch pattern, like seed stitch or a simple cable, for a more textured look. Stripes are easy to add — simply change colors at the beginning of a round. A contrast-colored thumb is a fun and modern detail that requires almost no extra skill.
You can also adjust the length of the cuffs or the hand section to suit your preferences. Some people love a very long wrist cuff that reaches halfway up the forearm; others prefer a shorter, sportier look. The pattern is modular enough that you can stretch or shorten any section without changing anything else.
If you want to make a pair with actual finger holes, you can create small openings for individual fingers using the same technique as the thumb — placing stitches on hold, casting on a few stitches over the gap, and coming back to knit a short finger tube afterward.
Recommended Video Tutorials
While written instructions are incredibly helpful, watching someone knit in real time can make certain techniques click in a way that words alone can’t. If you’re struggling with casting on with DPNs, search for “long-tail cast on double-pointed needles” on YouTube — there are dozens of clear, slow-motion videos that show exactly where your hands should be at each step.
For the thumb gusset specifically, look for videos titled “knitting thumb gusset for beginners” or “simple fingerless glove thumb tutorial.” Pay attention to where the markers are placed and how the increase stitches are made on either side of the gusset — seeing the M1L and M1R in action makes them much less mysterious.
Channels dedicated to beginner knitting often have full project walkthroughs for fingerless gloves, so you can knit along with an instructor in real time. Look for tutorials that use DPNs and worsted weight yarn, as these will most closely match the pattern you’ve just read.
A Final Word
Fingerless gloves are one of the best beginner knitting projects for a reason. They’re small enough to finish in a weekend but complex enough to teach you real skills — working in the round, shaping with increases, creating a thumb gusset, and finishing neatly. Every pair you knit makes the next one easier