Free Crochet Remote Control Caddy Pattern with Pockets

If you’ve ever lost a remote control between couch cushions, you already know exactly why this project exists. A crochet remote control caddy is one of those small but life-changing makes that sits quietly beside your sofa, holding everything you need within arm’s reach. And the best part? This one is completely free, beginner-friendly enough that you’ll breeze through it on a weekend, and customizable in so many ways that it will feel like it was made for your living room — because it was.

This free crochet remote control caddy pattern includes deep pockets that can hold multiple remotes, a phone, a pair of reading glasses, the TV guide, and anything else that tends to disappear into the abyss of your couch. It’s a practical, beautiful, and genuinely useful project, and once you make one for yourself, you’ll want to make a dozen more as gifts.

Let’s get into everything you need to know, from the materials list to the finished dimensions, and walk through every single step of the pattern together.

Why You’ll Love This Project

Crochet home décor has seen a massive resurgence in popularity, and for good reason. Handmade pieces bring warmth, texture, and personality to any space in a way that mass-produced items simply can’t replicate. A remote control caddy might sound humble, but it’s one of those items that people notice and ask about immediately. The texture of the stitches, the color you choose, the way it drapes over the arm of a chair — it’s a small thing that makes a big impression.

Beyond the aesthetics, there’s the pure practicality of it. According to various lifestyle surveys, people spend an embarrassing number of minutes per week searching for remote controls. A dedicated caddy solves that problem permanently. No more digging under cushions before your favorite show starts, no more finding the remote under the dog. Everything has a home, and that home looks beautiful.

This pattern is also a wonderful stitch practice piece. If you’re relatively new to crochet and want to build confidence with consistent gauge, basic shaping, and working in rows, this caddy gives you all of that without demanding anything too advanced. If you’re an experienced crocheter, it’s a satisfying quick project that comes together in just a few hours of focused work.

Materials You’ll Need

Before you begin, gather everything together so you’re not hunting for supplies mid-project. Here’s what this pattern calls for:

Yarn: Approximately 200 to 250 yards of worsted weight yarn (category 4). Cotton or cotton blend yarns work exceptionally well for this project because they hold their shape beautifully, are easy to wash, and have a lovely structure that keeps the pockets open and accessible. That said, acrylic yarn works perfectly if that’s what you have on hand, and a wool blend will give you extra durability. Choose whatever color suits your space — classic neutrals like cream, gray, or tan blend into any décor, while a bold jewel tone or a soft sage green can become a real focal point.

Hook: Size 5.0mm (H/8) crochet hook. This is the standard recommendation for worsted weight yarn, though you should always check your gauge and adjust if needed.

Notions: A tapestry needle for weaving in ends, scissors, and stitch markers to keep your place in pattern.

Optional: A short length of ribbon, leather cord, or decorative fabric strip if you want to add a hanging loop. A few decorative buttons can also be stitched on at the end for a charming finishing touch.

Finished Dimensions

The finished caddy measures approximately 14 inches wide by 10 inches tall when flat, with two pockets on the front side. The main body section, which drapes over the arm of a chair or sofa, is approximately 6 inches deep. This gives you plenty of coverage so it sits securely without sliding off, while the pockets are deep enough to hold a standard remote (most are between 6 and 8 inches long) without anything falling out.

If you want a larger caddy, you can easily add more foundation chains and extra rows. The pattern is very adaptable.

Gauge

18 stitches and 20 rows = 4 inches in single crochet with a 5.0mm hook and worsted weight yarn.

Gauge matters more for wearables than for home décor projects, but getting a close gauge will ensure your pockets end up the right depth to hold remotes securely. If your gauge is off, simply adjust your hook size up or down by a half millimeter and swatch again.

Abbreviations Used in This Pattern

All abbreviations follow US crochet terminology.

ch = chain
sl st = slip stitch
sc = single crochet
hdc = half double crochet
dc = double crochet
st(s) = stitch(es)
sk = skip
rep = repeat
RS = right side
WS = wrong side
BLO = back loop only
FLO = front loop only

Pattern Notes

This caddy is worked in flat rows. The main body is one large rectangle that folds over the arm of your furniture. The pockets are worked separately and then joined to the main body using a simple slip stitch seam. You can choose to work the pockets in a contrasting color for visual interest, or match the main body for a clean, uniform look.

The texture stitch used in this pattern (working into the back loop only for several rows) creates a subtle ribbed effect that adds beautiful dimension and also helps the fabric hold its structure. This is optional — you can work through both loops for a more traditional flat look if you prefer.

All turning chains in this pattern count as the first stitch of the row.

The Pattern: Free Crochet Remote Control Caddy with Pockets

Main Body

Foundation: Chain 64.

Row 1 (RS): Sc in the second ch from hook and in each ch across. You should have 63 sc. Ch 1, turn.

Rows 2 through 8: Sc in each st across. Ch 1, turn. (63 sc)

These first eight rows form the bottom section of your caddy that will sit on the outside of the chair arm.

Row 9: This row begins the texture section. Working in BLO only, sc in each st across. Ch 1, turn. (63 sc)

Rows 10 through 30: Continue working in BLO for each of these rows. The BLO ribbing creates that subtle woven texture that makes the finished caddy look so polished. Ch 1, turn at the end of each row. (63 sc)

Rows 31 through 38: Switch back to working through both loops. Sc in each st across. Ch 1, turn. (63 sc)

These final rows form the bottom edge that will hang on the inside of the chair arm.

Fasten off and weave in your ends. Set the main body aside.

You should now have a rectangle approximately 14 inches wide and 17 inches tall. This will fold at the center (around row 22 or so, depending on your gauge and the thickness of your chair arm) to drape over the furniture.

Pocket One (the larger pocket)

This pocket spans nearly the full width of the caddy and is deep enough to hold two or three remotes side by side.

Foundation: Chain 58.

Row 1: Sc in the second ch from hook and in each ch across. (57 sc) Ch 1, turn.

Rows 2 through 14: Sc in each st across. Ch 1, turn. (57 sc)

Row 15 (border row): Instead of chaining and turning, work a slip stitch border around the top edge of the pocket. Do not fasten off yet — you’ll use this working yarn to attach the pocket to the main body.

Set aside but do not fasten off.

Pocket Two (the smaller pocket, for phones and glasses)

Foundation: Chain 38.

Row 1: Sc in the second ch from hook and in each ch across. (37 sc) Ch 1, turn.

Rows 2 through 10: Sc in each st across. Ch 1, turn. (37 sc)

Row 11 (border row): Work a slip stitch border along the top edge.

Fasten off and weave in all ends.

Assembling the Caddy

This is where everything comes together, and it’s easier than it sounds.

Lay your main body flat with the right side facing up. Fold it in half widthwise so you can identify the midpoint — this fold line is where the caddy will drape over the arm of your chair.

Positioning the large pocket: Place the large pocket onto the lower half of the main body (the section that will hang on the inside of the chair arm), centering it horizontally. The bottom edge of the pocket should sit about half an inch above the bottom edge of the main body, leaving a small border all the way around.

Using your tapestry needle and a length of matching yarn, whipstitch or slip stitch the bottom and both side edges of the large pocket to the main body. Be sure to only sew through the back of the main body — you don’t want your seams visible on the outside. Pull your stitches snug but not so tight that the fabric puckers.

Positioning the small pocket: If you’d like two separate pockets, place the small pocket on the opposite half of the main body (the section that faces outward on the chair arm). Center it and attach it the same way. Alternatively, you can position both pockets side by side on the inner-facing section if you prefer to keep all your items on one side.

Optional divider: For the large pocket, you can create a divider by stitching a vertical line of slip stitches straight up the center of the pocket once it’s attached to the main body. This creates two narrower compartments — perfect for keeping remotes from getting tangled together, or for separating a remote from a phone charger.

Once both pockets are attached and you’ve added any dividers, weave in all remaining ends.

Finishing Touches

Give your caddy a gentle block if you’re working with cotton yarn. Dampen it thoroughly, smooth it into shape, and let it air dry flat. This step makes a noticeable difference in the finished look, evening out stitches and giving the caddy a crisp, professional appearance.

If you’d like to add buttons, now is the time. Sew them along the top border of the pockets or along the top edge of the main body for decoration. You can also crochet a small flower or leaf and attach it as an embellishment — a single crochet flower in a contrasting color looks charming and takes only a few minutes to make.

If you want a hanging option (for example, to hang the caddy on the side of a bed or nightstand), attach a length of ribbon or a crocheted chain loop to one corner of the top edge.

Tips for Customizing Your Remote Control Caddy

One of the best things about this pattern is how easy it is to make it your own. Here are some ideas that other crocheters love:

Color blocking is a simple way to add visual interest. Work the main body in one color, the pockets in a second, and use a third as your border yarn. Three coordinating shades from the same color family always look intentional and polished.

Tapestry crochet lets you add a simple geometric motif to the front pocket. Stripes, chevrons, or a basic plaid effect are all achievable with basic color changes and add a beautiful handmade quality to the finished piece.

Stitch swaps are easy to experiment with. Replacing the single crochet in the main body with a moss stitch or linen stitch creates a gorgeous woven texture. The granite stitch (alternating slip stitches and chains) gives the fabric an almost tweed-like appearance.

Sizing adjustments are straightforward. Add chains in multiples of two to increase width. Add rows in pairs to increase length or pocket depth. The pattern scales up and down easily, so you can make a version that fits a narrow reading chair arm just as easily as one designed for a wide sectional.

Care Instructions

If you made your caddy in cotton or a cotton blend, it’s machine washable on a gentle cycle in cold water. Reshape while damp and lay flat to dry. Avoid the dryer, as heat can shrink cotton significantly.

Acrylic yarn caddies can typically be machine washed and dried on low heat, but check your yarn’s specific care label to be sure. Wool blend caddies should be hand washed in cool water and laid flat to dry.

Making This as a Gift

A crochet remote control caddy is an absolutely wonderful gift for so many occasions. It’s practical, personal, and the fact that it’s handmade gives it a warmth and thoughtfulness that a store-bought item can never replicate. Consider making one for a housewarming, a birthday, a Father’s Day or Mother’s Day gift, or as a heartfelt holiday present.

For gifts, take a moment to think about the recipient’s home décor. A classic cream or off-white works in almost any setting. Someone with a cozy farmhouse style might love a chunky gray or a natural tan. A more contemporary space might suit a deep charcoal or a dusty blue. You know your people — choose a color that makes them feel like it was made just for them, because it was.

You can also personalize with initials by stitching a single letter onto the pocket in a contrasting yarn once the caddy is complete. It’s a small touch that makes a big impact.

Final Thoughts

A free crochet remote control caddy with pockets is one of those makes that reminds you why handmade matters. It solves a real, everyday problem. It sits in a room and adds something to it — texture, color, personality. It represents hours of intention and care. And every time someone reaches into that pocket and finds exactly what they’re looking for without digging through cushions, they’ll think of you.

This pattern is designed to be enjoyed at every skill level. Whether this is your tenth project or your hundredth, it’s a satisfying, quick, and genuinely useful make. Save it, share it, and make as many as you like. That’s exactly what free patterns are for.

Happy crocheting — and may your remote controls always be exactly where you expect them.