
FREE Easy Knit Hat Pattern: Cat Beanie — Easy Beanie Pattern for Beginners
If you’ve been looking for the perfect beginner knitting project, you’ve just found it. This free easy knit hat pattern walks you through every step of making an adorable cat beanie — complete with little pointed ears that make it irresistible. Whether you’ve just learned to cast on or you’ve been knitting for a few months and want something quick and rewarding, this pattern is designed with you in mind. No complicated stitch patterns, no confusing shaping, and no need to sew multiple pieces together. Just cozy yarn, simple knitting, and a finished hat you’ll be proud to wear or gift.
This cat beanie pattern works up quickly — most knitters finish it in a weekend — and the result is a snug, stretchy hat that fits most adults and older kids. You can make it in your favorite color, go bold with a two-tone design, or use up some of that beautiful yarn sitting in your stash. The options are endless, and the process is genuinely fun from cast-on to bind-off.
Let’s get into it.
Why This Cat Beanie Is the Perfect Beginner Knitting Project
Before we dive into the pattern itself, let’s talk about why this particular design is so beginner-friendly.
First, it uses only knit and purl stitches. There’s no lace work, no cables, no increases or decreases until the very top of the hat — and even those are simple. If you can knit in the round (or you’re willing to learn, which takes about ten minutes), you can make this hat.
Second, hats are one of the most forgiving knitting projects for beginners. Unlike sweaters or socks, a hat doesn’t need to fit perfectly at every point — it stretches, it’s worn on the head, and a few extra or missing stitches rarely ruins the final product. This makes it ideal for someone still getting used to maintaining consistent tension.
Third, the cat ears. Those little pointed triangles at the top of the hat are actually just folded and seamed sections of knitting — no picked-up stitches, no fiddly construction. If you can sew a straight line with yarn and a tapestry needle, you can create the ears. They look adorable and impressive, but they’re genuinely simple.
Finally, this is a project that gets finished. One of the biggest challenges new knitters face is abandoning a project midway through because it’s too hard or taking too long. A hat like this one keeps you motivated because you can see the progress growing with every round, and you reach the finish line in just a day or two.
Materials You’ll Need
Here’s what to gather before you start knitting your cat beanie.
Yarn: Approximately 100–150 yards of bulky weight yarn (size 5 or 6 on the label). Wool blends, acrylic, or wool-acrylic mixes all work beautifully. Choose something with a bit of stretch for the best fit.
Needles: US size 8 (5mm) or US size 9 (5.5mm) circular needles, 16 inches long, or double-pointed needles (DPNs) if you prefer. You can also use magic loop with a longer circular needle if that’s what you have on hand.
Tapestry needle: For seaming the ears and weaving in ends.
Scissors: A good pair for cutting yarn.
Stitch markers: At least two — one to mark the beginning of your round, and one to help with the ear placement later.
Optional: A second color of yarn for a contrast band or contrast ear color. About 20 yards is plenty for an accent.
Gauge
Gauge: 14 stitches and 20 rows = 4 inches in stockinette stitch on US size 9 needles (or your needle size to obtain gauge).
Gauge matters more than beginners often realize, but don’t be intimidated. Knit a small swatch about 6 inches square, wash it the same way you’d wash the finished hat, let it dry flat, and measure. If your swatch is too big (you have fewer stitches per inch than the pattern calls for), go down a needle size. If it’s too small (more stitches per inch), go up a needle size.
For a hat, being slightly off gauge won’t be catastrophic — the worst that happens is the hat comes out a little larger or smaller than intended. The finished hat in this pattern is designed to fit a head circumference of 21–22 inches with natural stretch covering 20–24 inches.
Abbreviations Used in This Pattern
CO: Cast on
K: Knit
P: Purl
K2tog: Knit two stitches together (a decrease)
PM: Place marker
SM: Slip marker
BOR: Beginning of round
St(s): Stitch(es)
Rnd(s): Round(s)
Pattern Notes
This hat is knit in the round from the brim to the crown. The brim is worked in 2×2 ribbing for stretch and a snug fit. The body is worked in stockinette stitch (all knit stitches when knitting in the round). The crown is decreased with simple k2tog decreases. The ears are formed last by folding and seaming small sections of the crown edge.
If you’re new to knitting in the round on circular needles, the key thing to remember is to make sure your stitches aren’t twisted around the needle before you join. Lay the needle flat with all stitches hanging down in the same direction, then join by knitting the first cast-on stitch with your working yarn. Place your beginning-of-round marker before you join.
FREE Easy Knit Hat Pattern: Cat Beanie
Cast On
Using your circular needles and your main color yarn, cast on 80 stitches using your preferred cast-on method. The long-tail cast on gives a neat, elastic edge and is highly recommended for hat brims.
Join to work in the round, being careful not to twist your stitches. Place marker for beginning of round.
Brim
Rnd 1–12: K2, P2 repeat to end of round.
Work this 2×2 ribbing for 12 rounds, or approximately 2.5 inches. This creates the stretchy brim of your hat. If you want a deeper brim that can be folded up, work 20 rounds instead. Ribbing is wonderfully forgiving and very satisfying to knit — you’ll fall into a rhythm quickly.
Body
Switch to stockinette stitch.
Rnds 13–40: Knit every stitch every round.
Continue knitting every round until the hat measures approximately 8 inches from the cast-on edge, or 9 inches if you want a slightly slouchy fit. At this point the hat will look like a basic tube — don’t worry, the magic happens next.
If you’re using a contrast color for the body or for a stripe near the crown, this is the section where you’d switch colors. Simply drop your main color and pick up your contrast color at the beginning of a round.
Crown Decreases
The crown decreases shape the top of the hat. You’ll work several decrease rounds separated by plain knit rounds to create a smooth dome.
Decrease Round 1: K8, K2tog repeat to end of round — 72 stitches remain.
Round 2: Knit all stitches.
Decrease Round 3: K7, K2tog repeat to end of round — 64 stitches remain.
Round 4: Knit all stitches.
Decrease Round 5: K6, K2tog repeat to end of round — 56 stitches remain.
Round 6: Knit all stitches.
Decrease Round 7: K5, K2tog repeat to end of round — 48 stitches remain.
Round 8: Knit all stitches.
Decrease Round 9: K4, K2tog repeat to end of round — 40 stitches remain.
Round 10: Knit all stitches.
Decrease Round 11: K3, K2tog repeat to end of round — 32 stitches remain.
Decrease Round 12: K2, K2tog repeat to end of round — 24 stitches remain.
Decrease Round 13: K1, K2tog repeat to end of round — 16 stitches remain.
Decrease Round 14: K2tog repeat to end of round — 8 stitches remain.
Cut yarn, leaving an 8-inch tail. Thread the tail onto your tapestry needle and draw it through all remaining 8 stitches, slipping them off the knitting needle as you go. Pull snugly to close the top of the hat. Weave in this tail on the inside of the hat.
Finishing the Crown Edge for Ears
Before you close up the top completely and weave everything in, take a moment to look at the top of your hat. You’re going to pinch two small sections at the crown to create the cat ears, so you want the hat to be fully assembled and seamed at the top before you make the ears.
Making the Cat Ears
This is the step everyone gets excited about, and it’s easier than it looks.
With the hat laying flat in front of you, the seamed top facing up, identify two points that will become the ears. For a symmetrical look, the ears should be positioned roughly one quarter of the hat’s circumference apart from each other — not directly opposite (which would look too wide) but not too close together either. A good rule of thumb is to pinch the ear spots about 2.5 to 3 inches from the center of the top seam on each side.
To make one ear: Pinch the crown of the hat at your chosen ear spot, pulling upward so that a little triangle forms. The base of this triangle should be about 1.5 inches wide. Using your tapestry needle and a length of matching yarn, whipstitch across the base of the pinched triangle from one side to the other. Pull firmly to hold the point upright. Secure the yarn well with a knot on the inside of the hat and weave in the end.
Repeat for the second ear in the corresponding spot on the other side of the hat.
When you’re done, fluff the ears a bit with your fingers to make sure they’re standing at the same angle. The structure of the knitted fabric holds the shape nicely without any additional stuffing or wire.
Weaving In Your Ends
With your tapestry needle, weave in any remaining yarn ends on the inside of the hat. Weave them back and forth through the purl bumps of the stockinette fabric in a few different directions — this prevents them from slipping out over time, especially after washing.
Sizing Adjustments
This pattern is written for an adult head circumference of 21–22 inches. Here’s how to adjust it for different sizes.
For a child’s hat (head circumference 18–20 inches), cast on 64 stitches and work the body until the hat measures 7 inches from the cast-on edge before beginning decreases. Adjust your decrease rounds to work evenly across 64 stitches by starting with K6, K2tog and working down from there.
For a large adult hat or slouchy fit, cast on 88 or 96 stitches and work the body until the hat measures 10 inches before decreasing. Start your decreases with K9, K2tog or K10, K2tog accordingly.
As long as your stitch count is a multiple of 10 for this pattern, your decrease math will work out cleanly. When in doubt, grab a calculator and divide your stitch count by the number of decreases per round you want — the number you’re left with is how many plain knit stitches you work before each K2tog.
Yarn Suggestions
Since this is a beginner pattern, it’s worth talking about yarn choices because the right yarn makes a huge difference in your experience.
For a beginner, a smooth medium-to-bulky weight yarn in a light or medium color is ideal. Smooth yarn lets you see your stitches clearly, which makes it much easier to spot mistakes and correct them. Lighter colors are easier to see than dark ones — black yarn in particular can be very difficult for new knitters because the stitches blend together.
Some great beginner-friendly yarn options include Lion Brand Pound of Love, Cascade 220 Superwash, Paintbox Yarns Simply DK (held double for extra weight), Red Heart Super Saver, and Berroco Comfort. All of these are widely available, affordable, and easy to work with.
If you want to splurge a little, Malabrigo Rios is a dream to knit with and creates a beautifully soft finished hat. It’s not inexpensive, but a hat uses so little yardage that it’s an affordable luxury even in nicer yarn.
Tips for Success
A few things will make this project go more smoothly from the very first round.
Count your stitches at the end of every other round during the crown decreases. It’s easy to accidentally skip a decrease or work one in the wrong place, and catching a mistake early saves a lot of frustration.
Use a locking stitch marker or a small piece of contrasting yarn as your beginning-of-round marker. This helps you keep track of where each round starts without losing count.
If you find that your stitches are splitting as you knit — meaning your needle is going through the strands of the yarn instead of under the whole stitch — try a needle with a blunter tip. Wood or bamboo needles are often easier for beginners than metal ones because they’re slightly grippy and stitches don’t slide off unexpectedly.
When you’re working the ribbing brim, hold your yarn a little more loosely than you think you need to. Tight ribbing loses its stretch and can make the hat difficult to put on. If your ribbing feels snug after a few rounds, try going up half a needle size just for the brim.
Block your finished hat. Wet blocking (soaking the hat in cool water, gently squeezing out the excess, and laying it flat to dry on a hat form or a balloon blown to the right size) evens out your tension and makes the whole thing look more professional. It takes an extra hour of drying time but makes a noticeable difference.
Ways to Customize Your Cat Beanie
Once you’ve got the basic pattern down, there are so many ways to make it your own.
Try stripes by switching colors every two rounds during the body section. Carry the unused yarn up the inside of the hat so you don’t have to cut and reattach constantly.
Make the ears in a contrast color by picking up stitches around the ear base and knitting a small triangle separately, then seaming it in place. This takes a little more skill but creates a really polished two-toned look.
Add a pompom to the center of the crown before you make the ears. A big fluffy pompom between two cat ears gives the hat a playful, almost Halloween-costume energy that kids especially love.
Work the entire hat in a seed stitch or moss stitch instead of stockinette for a more textured, rustic look. These stitches alternate knit and purl stitches in a way that creates a bumpy texture and lies flat without rolling at the edges — though you may want to skip the ribbing brim and just work seed stitch all the way from the cast-on if you go this route.
Frequently Asked Questions
Can I knit this hat flat instead of in the round? Yes, with some modification. You’d knit back and forth on straight needles, purling every wrong-side row in the body section (since stockinette worked flat requires purling on the return row). You’d then seam the sides of the hat together using mattress stitch before making the ears. It’s a bit more work but completely doable if circular needles aren’t available to you.
What if I don’t know how to knit in the round? This is a wonderful project to learn on. Search for a short video tutorial on joining to knit in the round — you’ll find dozens of beginner-friendly options. Most people pick it up within a single sitting.
Can I use DPNs instead of circular needles? Absolutely. Use DPNs throughout, or switch to them when the crown stitches become too few to comfortably fit on the circular needle. Most knitters switch to DPNs around the Decrease Round 9 or 11 stage.
How do I wash the finished hat? Check your yarn label. Most acrylic yarns are machine washable on a gentle cycle. Wool hats should be hand washed in cool water and laid flat to dry. Avoid wringing or twisting the hat while it’s wet.