Adorable Bunny Crochet Pattern – Free Easy Tutorial for Crafters
If you’ve been searching for the perfect bunny crochet pattern, you’ve landed in exactly the right place. Whether you’re a beginner just learning to hold a hook or an experienced crafter looking for a quick and satisfying project, this free tutorial will walk you through creating an absolutely adorable crocheted bunny from start to finish. These little bunnies make wonderful gifts, Easter decorations, nursery accents, and toy companions for little ones. Best of all, the pattern uses basic stitches that most crafters already know, so you can dive right in without any intimidation.
Let’s talk about what makes this pattern special. It produces a chunky, soft, huggable bunny that stands about six to seven inches tall when finished. The design is clean and simple, with long floppy ears, a sweet round body, and tiny limbs that give it that irresistible stuffed-animal look. You can customize the color palette endlessly — make a classic white bunny, a soft lavender one, a warm gray one, or go wild with rainbow yarn. Once you’ve made one, you’ll want to make a dozen.
Materials You’ll Need
Before you begin, gather everything on this list. Having your supplies organized and ready makes the whole process much smoother.
Yarn: You’ll need a medium weight (worsted, size 4) yarn in your main color. Approximately 100–150 yards is enough for one bunny. You can also grab a small amount of a contrasting color for the inner ear or tail if you want to add a little detail.
Hook: A 4.0mm or 4.5mm crochet hook works best with worsted weight yarn. If your finished pieces feel too loose or floppy, size down slightly.
Polyfill stuffing: You’ll need enough to firmly stuff the body, head, and limbs. About half a bag is plenty for one bunny.
Yarn needle: For sewing pieces together and weaving in ends.
Safety eyes: Two 9mm or 12mm safety eyes. If you’re making this bunny for a child under three years old, embroider the eyes with black yarn instead of using safety eyes.
Stitch markers: Optional but helpful for keeping track of round beginnings.
Scissors: Any pair will do.
Gauge and Sizing
Gauge isn’t critical for this amigurumi-style pattern since we’re making a stuffed toy. However, working tightly is important. A tight gauge means smaller holes in the fabric, which prevents the polyfill from showing through. If you can see the white stuffing between your stitches, try going down a hook size.
When finished, the bunny’s body will be roughly 3.5 inches wide and 4 inches tall. The head will measure about 3 inches in diameter. The total height with ears is approximately 6–7 inches. Feel free to scale up by using bulky yarn and a 6mm hook, or scale down using fingering weight yarn and a 2.5mm hook for a miniature version.
Abbreviations
This pattern uses standard US crochet terminology. Here’s a quick reference for the stitches used throughout.
MR – Magic ring (also called a magic circle)
ch – Chain
sl st – Slip stitch
sc – Single crochet
inc – Increase (two single crochets in the same stitch)
dec – Invisible decrease (insert hook through front loops of next two stitches, yarn over, pull through, yarn over, pull through both loops)
BLO – Back loop only
FLO – Front loop only
st(s) – Stitch(es)
rnd – Round
rep – Repeat
Pattern Instructions
Body
The body is worked from the bottom up in continuous rounds. Do not join rounds unless instructed. Use a stitch marker to track the beginning of each round.
Rnd 1: Start with a MR, sc 6 into the ring. (6 sts)
Rnd 2: Inc in each st around. (12 sts)
Rnd 3: Sc 1, inc rep 6 times. (18 sts)
Rnd 4: Sc 2, inc rep 6 times. (24 sts)
Rnd 5: Sc 3, inc rep 6 times. (30 sts)
Rnd 6: Sc 4, inc rep 6 times. (36 sts)
Rnds 7–14: Sc in each st around. (36 sts) — Work 8 rounds even.
Rnd 15: Sc 4, dec rep 6 times. (30 sts)
Rnd 16: Sc 3, dec rep 6 times. (24 sts)
Rnd 17: Sc 2, dec rep 6 times. (18 sts)
At this point, begin stuffing the body firmly. Continue to add stuffing as you close it up.
Rnd 18: Sc 1, dec rep 6 times. (12 sts)
Rnd 19: Dec 6 times. (6 sts)
Fasten off, leaving a short tail. Use your needle to weave through the remaining 6 stitches and pull tight to close. Weave in the end.
Head
The head is made the same way as the body but sized slightly smaller.
Rnd 1: MR, sc 6. (6 sts)
Rnd 2: Inc in each st around. (12 sts)
Rnd 3: Sc 1, inc rep 6 times. (18 sts)
Rnd 4: Sc 2, inc rep 6 times. (24 sts)
Rnd 5: Sc 3, inc rep 6 times. (30 sts)
Rnd 6: Sc 4, inc rep 6 times. (36 sts)
Rnds 7–12: Sc in each st around. (36 sts) — Work 6 rounds even.
Rnd 13: Sc 4, dec rep 6 times. (30 sts)
Rnd 14: Sc 3, dec rep 6 times. (24 sts)
Before attaching safety eyes and continuing, position them between rounds 10 and 11, spaced about 8–10 stitches apart. Attach them firmly.
Rnd 15: Sc 2, dec rep 6 times. (18 sts)
Begin stuffing the head firmly.
Rnd 16: Sc 1, dec rep 6 times. (12 sts)
Rnd 17: Dec 6 times. (6 sts)
Fasten off, leaving a long tail (about 12 inches) for sewing the head to the body. Close the opening the same way as the body.
Ears (Make Two)
The ears are the signature feature of this bunny and give it that classic look. They’re worked flat, then folded or left as is before being sewn on.
Rnd 1: MR, sc 6. (6 sts)
Rnd 2: Inc in each st around. (12 sts)
Rnd 3: Sc 1, inc rep 6 times. (18 sts)
Rnds 4–14: Sc in each st around. (18 sts) — Work 11 rounds even.
Rnd 15: Sc 1, dec rep 6 times. (12 sts)
Do not stuff the ears. Fasten off, leaving a long tail for sewing. Flatten the ear so the opening sits straight across and sew closed across the 12 remaining stitches to create a flat base for attaching.
Optional inner ear: Using a pink or contrasting yarn, embroider a simple oval shape on the front of each ear or work a narrow strip of surface single crochet up the center to suggest the inner ear detail.
Arms (Make Two)
Rnd 1: MR, sc 6. (6 sts)
Rnd 2: Inc in each st around. (12 sts)
Rnds 3–10: Sc in each st around. (12 sts) — Work 8 rounds even.
Rnd 11: Dec 6 times. (6 sts)
Lightly stuff the arms — not too firm. Fasten off, leaving a tail for sewing.
Legs (Make Two)
The legs are slightly larger than the arms and shaped to sit flat at the bottom.
Rnd 1: MR, sc 6. (6 sts)
Rnd 2: Inc in each st around. (12 sts)
Rnd 3: Sc 1, inc rep 6 times. (18 sts)
Rnds 4–5: Sc in BLO around. (18 sts) — This creates a defined edge at the bottom of the foot.
Rnds 6–10: Sc in each st around. (18 sts)
Rnd 11: Sc 1, dec rep 6 times. (12 sts)
Stuff the legs firmly before closing.
Rnd 12: Dec 6 times. (6 sts)
Fasten off, leaving a tail for sewing.
Tail
The tail is just a small pom-pom or a crocheted ball. Here’s the crocheted version.
Rnd 1: MR, sc 6. (6 sts)
Rnd 2: Inc in each st around. (12 sts)
Rnds 3–4: Sc in each st around. (12 sts)
Rnd 5: Dec 6 times. (6 sts)
Stuff lightly. Fasten off, close, and leave a tail for sewing. If you prefer a yarn pom-pom, wrap yarn around three fingers about 30 times, tie it tightly in the middle, and trim into a round shape. Either version works beautifully.
Assembly
This is where your bunny really comes to life. Take your time with assembly because even placement makes a big difference in the finished look.
Start by sewing the head to the body. Position the head on top of the body, slightly toward the front. Thread your long tail onto the yarn needle and use a whip stitch to sew around the base of the head, attaching it firmly to the top of the body. Make sure it doesn’t wobble. Pull tight and weave in the end securely.
Next, attach the ears to the top of the head. Position them roughly between rounds 1 and 4 of the head, spaced about 6 stitches apart on either side of the center. You can angle them slightly outward or keep them straight up — both looks are adorable. Sew each ear down firmly using the long tails.
Sew the arms to the sides of the body, positioned around rounds 5–7 from the top. They should hang naturally at the sides. You can sew them in a position where they angle slightly forward if you want the bunny to have a hugging pose.
Attach the legs to the bottom of the body, positioning them so the bunny can sit upright. The flat base of the foot (created by working in BLO) should face forward. Space the legs evenly on either side of the center base.
Finally, sew the tail to the back of the body, roughly centered between rounds 8 and 12. Pull the yarn through a few times and tie off firmly inside the body.
Optional Embellishments
Once your bunny is assembled, you can add little details that make it truly special. Using black embroidery floss or dark yarn, stitch a small nose — a simple Y-shape or triangle works perfectly — just below the eyes and between them. Add a few tiny stitches for a subtle smile if you like.
You can tie a small ribbon around the bunny’s neck for a sweet finishing touch. A 1/4-inch satin ribbon in pink, lilac, or soft yellow looks beautiful against almost any yarn color.
If you’re making the bunny as an Easter decoration, consider adding a small basket in its arms made from a few rounds of brown or tan yarn. If it’s a gift for a baby, choose soft, machine-washable yarn and skip the safety eyes in favor of embroidered ones.
Tips for Bunny Crochet Success
Amigurumi patterns can feel a little tricky the first time around, but a few simple habits will make the whole process much easier. Always work tightly. Loose stitches are the most common problem with stuffed animals because they let the filling peek through. If you tend to crochet loosely, drop down a hook size.
Use a stitch marker every single round. It’s easy to lose track of where one round ends and the next begins, and miscounting ruins the shape faster than anything else. A simple loop of contrasting yarn through the first stitch of each round works perfectly if you don’t have stitch markers.
When stuffing, use small pieces of polyfill rather than large clumps. Smaller pieces distribute more evenly and give a smoother surface without lumps. Stuff more firmly than you think you need to — the fabric loosens a bit over time.
Take your time with the invisible decrease. It’s worth learning properly because it creates a smooth, nearly invisible decrease that makes the surface of your amigurumi look clean and professional rather than bumpy.
Yarn Color Suggestions
The beauty of a simple pattern like this is how dramatically it changes with different yarn colors. A classic white or cream bunny looks timeless and works for any occasion. Soft gray gives it a more modern, minimalist feel. Pale pink is sweet and feminine. Lavender is perfect for spring and Easter. Brown or tan with a cream belly creates a realistic rabbit look.
Don’t be afraid to use variegated yarn either. Self-striping yarns can create unexpected and delightful color patterns that make each bunny one of a kind. Just keep in mind that very busy variegated yarn can obscure the stitch definition, so a subtle color-change yarn tends to work better than a wildly multicolored one.
Caring for Your Finished Bunny
If you use a machine-washable yarn like a cotton blend or superwash wool, you can wash the finished bunny in a mesh laundry bag on a gentle cycle in cold water. Lay flat to dry. Avoid the dryer unless your yarn label specifically says it’s dryer-safe.
For yarn that isn’t machine-washable, spot-clean the bunny with a damp cloth and mild soap. Allow it to air dry completely before giving it back to little hands.
Final Thoughts
This free bunny crochet pattern is genuinely one of those projects that feels as good to make as it does to give. There’s something deeply satisfying about watching a flat loop of yarn transform into an adorable little creature stitch by stitch. The pattern is beginner-friendly enough to be approachable but engaging enough to hold an experienced crafter’s attention.
Once you’ve made your first bunny, the variations are endless. Make a whole family in different sizes. Create themed bunnies with tiny accessories. Gift them at baby showers, birthdays, and Easter. Sell them at craft fairs. Or keep one on your desk as a reminder that you made something lovely with your own two hands.
Happy crocheting — and enjoy every single stitch.
