Vanilla AirPods Pro Case – Free Crochet Pattern + Tutorial

There is something about a handmade accessory that makes every single time you reach for it feel just a little bit special. You made that. You chose the yarn, worked every stitch, and turned a few grams of fiber into something functional and beautiful. That is the magic of crochet, and it never gets old.

Today I am sharing one of my favorite small projects: a vanilla AirPods Pro case. The color is creamy, soft, and timeless — think the inside of a vanilla bean, that warm off-white that goes with absolutely everything. The case is the perfect size for the AirPods Pro charging case, with a snug fit that keeps your earbuds secure without making you wrestle them out every time you want to listen to music. It works up quickly, makes a wonderful gift, and is beginner-friendly enough that you can finish it in an afternoon.

I have included the full free pattern below, along with step-by-step photos and notes to help you through every round. Whether you are brand new to crochet or you have been hooking for years, I hope you love making this one as much as I do.

Why You Will Love This Pattern

Before we get into the materials and stitches, let me tell you a little bit about why this project deserves a spot on your to-make list.

First, it is genuinely fast. Unlike a blanket or a sweater that demands weeks of commitment, this little case works up in roughly one to two hours depending on your pace. That makes it ideal for those evenings when you want to feel productive but your brain just needs something simple and soothing. There is a reason small crochet projects are often called “brain candy” — they give you all the satisfaction of finishing something without any of the overwhelm.

Second, it is practical in the best possible way. AirPods cases are notorious for getting scratched inside bags, collecting lint in pockets, and generally looking sad after a few months. A crocheted cover adds a cushioning layer that protects the charging case while also making it ten times easier to find at the bottom of your bag. That soft vanilla color stands out beautifully against dark bag linings.

Third, the vanilla colorway specifically is one of those non-decisions that always turns out right. It does not compete with anything. It goes with your gym bag, your evening clutch, your backpack, your tote. It feels clean and minimal without being stark. If you have ever wanted a project where you just pick one skein and go, this is it.

And fourth — and I say this as someone who has crocheted a lot of gifts over the years — this is one of those items people actually use. Not every handmade gift gets the appreciation it deserves, but a case for something someone reaches for multiple times a day? They will think of you every time they pop those earbuds in.

Materials You Will Need

Getting your supplies together before you start makes the whole process smoother. Here is everything you need for this project.

Yarn: You will need approximately 30–40 yards of fingering weight or light DK weight yarn in vanilla or cream. I used a 100% cotton fingering weight for the sample shown here, which gives the case a firm, structured body and a slightly matte finish that I love. Cotton is especially practical for this project because it does not stretch out as much as acrylic, which helps the case hold its shape over time. That said, a soft acrylic or cotton-acrylic blend in a similar weight will also work beautifully.

Hook: I recommend a 2.5mm or 3.0mm crochet hook. The exact hook size depends on your yarn weight and your personal tension. You want the fabric to feel relatively dense and tight — loose fabric will not protect your AirPods case as well, and a very open stitch pattern means your case might not hold its shape. If your swatch feels floppy or too open, go down a hook size.

Notions: You will need a yarn needle for weaving in ends, scissors, and a stitch marker (a safety pin or scrap piece of yarn works perfectly fine if you do not have a traditional stitch marker). You will also need a button or snap closure — I used a small wooden button in a warm honey tone that complements the vanilla yarn beautifully. You could also use a magnetic snap, a lobster clasp, or simply leave the top open if you prefer.

The AirPods Pro case itself for sizing reference. Keep it nearby as you work so you can check the fit every few rounds.

Gauge and Sizing Notes

Gauge: approximately 24 stitches and 26 rows to 4 inches in single crochet, using a 2.5mm hook and fingering weight yarn.

The finished case measures approximately 2.5 inches wide by 3 inches tall, which fits the AirPods Pro charging case snugly. If you have the AirPods Pro 2nd generation case (which is very slightly different in dimensions), you may want to add one extra round to the body to accommodate the size. Always check the fit before you begin the flap section.

If your tension runs loose, go down a hook size rather than adjusting your stitch count — this will preserve the shape of the case without requiring any math.

Abbreviations

Here are the abbreviations used in this pattern. If you are new to crochet, every term here links to a beginner-level stitch — none of them should feel intimidating.

ch — chain
sl st — slip stitch
sc — single crochet
inc — increase (two single crochets in the same stitch)
dec — decrease (single crochet two stitches together, also written sc2tog)
BLO — back loop only
FLO — front loop only
st(s) — stitch(es)
MR — magic ring
rnd — round
RS — right side

Free Pattern: Vanilla AirPods Pro Case

The Base

Begin with a magic ring.

Rnd 1: Ch 1, work 6 sc into the magic ring. Pull ring closed snugly. (6 sts)

Rnd 2: Inc in each st around. (12 sts)

Rnd 3: Sc 1, inc repeat around. (18 sts)

Rnd 4: Sc 2, inc repeat around. (24 sts)

Rnd 5: Sc 3, inc repeat around. (30 sts)

At this point you should have a small, flat circle approximately 1.5 inches in diameter. Place your AirPods Pro case on top — the circle should cover the base with just a little extra room around the edges.

The Body

Rnd 6: Working in BLO only, sc in each st around. (30 sts) — This round creates the crisp edge between the base and the body. Working in back loops only here is important; it is what gives the base a defined corner rather than a rounded, slouchy look.

Rnds 7–20: Sc in each st around. (30 sts per round) — You will work these rounds in both loops as normal. Continue until the body of the case reaches approximately 2.75 inches in height, or until the AirPods Pro case fits inside with about half an inch to spare at the top. Check the fit regularly by slipping your AirPods case inside.

At the end of Rnd 20 (or your final body round), do not fasten off. You will now work the flap.

The Flap

The flap is worked in rows rather than rounds. This is a flat section that folds over to close the top of the case.

Row 1 (RS): Ch 1, turn, sc across 15 sts (half the total stitch count), leaving the remaining 15 sts unworked. (15 sts)

Row 2: Ch 1, turn, dec, sc to last 2 sts, dec. (13 sts)

Row 3: Ch 1, turn, sc across. (13 sts)

Row 4: Ch 1, turn, dec, sc to last 2 sts, dec. (11 sts)

Row 5: Ch 1, turn, sc across. (11 sts)

Row 6: Ch 1, turn, dec, sc to last 2 sts, dec. (9 sts)

Row 7: Ch 1, turn, sc across. (9 sts)

Row 8: Ch 1, turn, dec, sc to last 2 sts, dec. (7 sts)

For a rounded flap edge, proceed to the border row below. For a straight edge, work one more plain row before the border.

Border Row: Ch 1, do not turn. Work a row of sc evenly along the left edge of the flap, then across the bottom back edge of the flap opening (the 15 unworked stitches from Row 1), then up the right edge of the flap. Sl st to join at the top corner. Fasten off and weave in ends.

Buttonhole and Button

With the flap folded down over the front of the case, use a stitch marker to mark the position of your button on the body of the case. The exact placement will depend on the size of your button and how snugly you want the flap to close.

For the buttonhole: rejoin yarn at the center top of the flap (Row 8). Ch 4, skip 2 sts, sl st into the next st. This creates a small loop buttonhole. If your button is larger, increase the chain count by 1 for every extra stitch you need to accommodate.

Sew your button securely to the front of the case body at the marked position using a length of matching yarn and a yarn needle.

Finishing Touches

Weave in all ends very thoroughly. Because this case will be handled daily, you want the ends to stay put. I recommend weaving each end in at least two different directions and then giving the yarn a gentle tug to make sure nothing is coming loose.

If you used cotton yarn, you can lightly dampen the finished case and gently shape it around your AirPods Pro charging case to block it into the perfect fit. Let it dry completely before using. This step is optional but it does give the case a noticeably neater, more finished look.

Customization Ideas

One of the best things about a small project like this is how easy it is to make it your own. Here are a few ways to personalize your vanilla AirPods Pro case.

Add a charm or tassel. A small yarn tassel in a contrasting color sewn to the flap makes the case easier to grab from a bag and adds a lovely decorative touch. I am a big fan of a pale blush or sage green tassel against vanilla — it feels very soft and botanical.

Try a textured stitch. If you want to add a little more visual interest without changing the vanilla color palette, substitute the plain single crochet body rounds with a waffle stitch or a simple moss stitch. Both create beautiful texture and work at a similar gauge.

Embroidery details. Once the case is finished, use a yarn needle and a coordinating or contrasting thread to embroider a small flower, a monogram initial, or a simple geometric shape onto the front panel. This is a wonderful way to make a gift feel truly personal.

Striped version. Work the body rounds in alternating colors — vanilla and a dusty terracotta, or vanilla and a sage green — for a stripe pattern that still feels minimal and modern. Even one stripe near the top of the body makes a big visual impact.

Different closure options. Instead of a button, you could use a gold lobster clasp and a small ring sewn to the case body, which gives the finished piece a more structured, almost jewelry-like feel. You could also skip the flap entirely and add an elastic loop at the top of the body for a simpler, more casual design.

Tips for Beginners

If this is one of your first crochet projects, here are a few notes that will help you get a clean result.

Work tightly and consistently. Tension is the single biggest factor in how your finished case looks and fits. If your stitches are very uneven, it helps to practice on a small swatch before you begin. A few rows of single crochet worked tightly and evenly makes an enormous difference.

Use a stitch marker from the very first round. In crochet worked in continuous rounds, it is very easy to lose track of where one round ends and the next begins. Mark the first stitch of each round and move the marker up as you go.

Do not be tempted to skip the magic ring. I know a few crochet patterns start with a chain circle as an alternative, but for a project like this where the base needs to be flat and the center needs to be completely closed, the magic ring is the right choice. It eliminates the small hole that a chain circle can leave behind.

Count your stitches at the end of every round during the base section. The increases happen every round in the base and it is easy to add one too many or skip one. A stitch count check at the end of each round takes five seconds and can save you from a base that comes out lopsided.

A Few Words About This Pattern

I designed this pattern because I could not find a crochet AirPods Pro case pattern that fit my own case perfectly. So many of the patterns I tried were either too loose, too short, or had a proportionally odd flap. I worked through several versions before landing on the stitch count and shaping here, and I am really happy with how it turned out.

The vanilla colorway was not planned — it happened because that was the cotton yarn I had sitting on my desk the day I started swatching, and once I saw the little base circle in that creamy off-white I could not imagine it any other color. Sometimes the best creative decisions are accidental.

I named this pattern “Vanilla” not just for the color but for the feeling of working it. It is uncomplicated. It is reliable. It is the kind of project that lets your hands move on autopilot while your mind wanders somewhere pleasant. And just like vanilla itself, it is never as boring as people assume — there is a warmth and a depth to it that more flashy options just do not have.

Sharing Your Makes

If you make this pattern, I would absolutely love to see your finished case. Share your photos on Instagram and tag me — I reshare as many as I can and I genuinely love seeing how different yarns and hook sizes change the look of the finished piece. I have seen versions of my small accessory patterns in the most beautiful, unexpected colors and it never gets old.

If you leave a comment on this post with a question about the pattern, I check in regularly and I am happy to help troubleshoot any tricky spots.

Happy crocheting, and I hope your vanilla case turns out every bit as lovely as you imagine it.