How to knit fingerless gloves for beginners – Step by step tutorial [+video]

How to Knit Fingerless Gloves for Beginners – Step by Step Tutorial [+Video]

If you’ve been wanting to learn how to knit fingerless gloves but weren’t sure where to start, you’re in the right place. This step-by-step tutorial is designed with complete beginners in mind, breaking down every part of the process so that by the end, you’ll have a cozy, stylish pair of fingerless gloves ready to wear. Whether you’re picking up knitting needles for the first time or you’ve made a few scarves and want to try something new, this guide will walk you through everything you need to know.

Fingerless gloves are one of the best beginner knitting projects because they’re small enough to finish quickly, useful enough to actually wear, and just challenging enough to teach you valuable new skills. Let’s get started.


Why Fingerless Gloves Are a Great Beginner Project

Before we dive into the how-to, it’s worth understanding why fingerless gloves are such a popular starting point for knitters moving beyond scarves and dishcloths.

First, the size is manageable. A pair of fingerless gloves uses a relatively small amount of yarn, so even if you make a mistake and need to start over, you haven’t wasted a lot of time or material. Second, they knit up quickly. Most beginners can complete a pair in a single weekend, which gives you a satisfying sense of accomplishment. Third, they teach you a genuinely useful skill: knitting in the round. This technique opens the door to countless other projects like hats, socks, and mittens.

Fingerless gloves also give you a natural introduction to shaping, thumb openings, and working with smaller needle sizes, all of which will serve you well as you tackle more complex patterns down the road.


What You’ll Need

Gathering your supplies before you start will make the whole process smoother. Here’s what you’ll need for a standard beginner-friendly pair of fingerless gloves.

Yarn: Choose a worsted weight yarn (sometimes labeled as “medium” or category 4 on the skein band). This weight is thick enough to be easy to handle but fine enough to create a glove with a nice drape. Look for a smooth, light-colored yarn if you’re a beginner — dark or textured yarns make it harder to see your stitches. You’ll need roughly 100 to 150 yards per glove, so about 200 to 300 yards total. 100% wool or a wool blend works beautifully and is forgiving to knit with.

Needles: You have two main options when it comes to knitting fingerless gloves in the round. The first option is double-pointed needles (DPNs) in a US size 7 (4.5mm). These come in sets of four or five and allow you to knit a small tube. The second option is a short circular needle (a 9-inch or 12-inch circular in US size 7) or the magic loop method with a 32-inch or longer circular needle. If you’re a true beginner, double-pointed needles are more traditional and easier to find guidance for, but all methods produce the same result.

Other supplies: You’ll need a tapestry needle (also called a yarn needle or darning needle) for weaving in ends at the finish, a stitch marker to mark the beginning of each round, scissors, and a tape measure. Optionally, a row counter or a simple piece of paper to track your rounds is very helpful.


Understanding the Pattern: Key Terms and Abbreviations

Knitting patterns use shorthand abbreviations. Before you pick up your needles, make sure you understand these basic terms, because you’ll see them throughout this tutorial.

CO stands for cast on, which means creating the initial loops on your needle. K means knit, the most basic knitting stitch. P means purl, the second fundamental stitch. K2, K3, etc. simply means to knit that number of stitches. St or sts means stitch or stitches. Rnd or rnds means round or rounds (used instead of “row” when knitting in the round). PM means place marker. SM means slip marker (move it from one needle to the other without knitting it). M1 or M1L/M1R means “make one,” a type of increase where you create a new stitch. K2tog means knit two stitches together, a simple decrease. The term “in the round” means you’re knitting in a continuous spiral to create a tube rather than knitting flat rows back and forth.


Knitting Gauge and Why It Matters

Gauge refers to how many stitches and rows fit into a given measurement, usually a 4-inch (10cm) square. It matters because if your gauge is too loose or too tight, your gloves will end up the wrong size.

For this pattern, the target gauge is roughly 18 stitches and 24 rounds over 4 inches in stockinette stitch using worsted weight yarn and US size 7 needles.

To check your gauge, cast on about 24 stitches and knit in the round (or flat if that’s easier for a swatch) for 24 rounds. Lay the swatch flat, measure the center portion, and count the stitches. If you have too many stitches in 4 inches, your gauge is too tight — try larger needles. If you have too few, your gauge is too loose — try smaller needles.

Many beginners skip the gauge swatch because they’re eager to start. That’s understandable, but for a fitted item like gloves, it really is worth taking the 20 minutes to check.


Sizing

This tutorial covers a standard adult small/medium size, which fits most women’s hands comfortably. The finished glove should measure approximately 7 inches in circumference and 8 inches in length from cast-on edge to the top of the fingers.

To adjust for a larger hand, add 4 stitches to your cast-on (multiples of 4 work best for ribbing) and add extra length in the body section. For a smaller hand, subtract 4 stitches. You can also measure your own hand around the widest part (excluding the thumb) and multiply that number by your stitch gauge to find the right cast-on number.


Step 1: Cast On

Using your preferred cast-on method, cast on 36 stitches. If you’re not sure which cast-on to use, the long-tail cast-on is highly recommended for this project. It creates a stretchy, neat edge that works perfectly for the cuff of a glove.

If you’re using double-pointed needles, divide your 36 stitches evenly across three or four needles. Place a stitch marker to indicate the beginning of the round, and carefully join to work in the round. Make sure your cast-on edge isn’t twisted around the needle before you join — this is a common beginner mistake that creates a spiral you can’t undo without starting over. Lay the needles flat before joining and confirm that all the stitches hang down from the needle without any twisting.


Step 2: Knit the Cuff Ribbing

The cuff is worked in a 2×2 rib pattern, which means you alternate between knitting 2 stitches and purling 2 stitches. This creates the stretchy, textured band at the bottom of the glove that hugs your wrist.

Work the ribbing as follows: knit 2, purl 2, and repeat this sequence all the way around the round. Repeat this for 15 rounds (approximately 2.5 inches). If you want a longer cuff, simply add more rounds here.

The ribbing will feel a little awkward at first because you’re switching between knit and purl stitches, but after a few rounds you’ll fall into a rhythm. Keep your tension consistent — not too tight, not too loose.


Step 3: Knit the Body

Once your cuff is the right length, it’s time to work the body of the glove. This section is worked entirely in stockinette stitch, which when knitting in the round simply means you knit every stitch of every round. No purling required!

Knit every stitch of every round for approximately 10 rounds. This creates the smooth, stretchy tube that covers the lower palm and wrist.


Step 4: Create the Thumb Gusset

This is where things get a little more interesting, and it’s the part that makes a glove fit so much better than a simple tube. The thumb gusset is a small triangular section of increasing stitches that creates room for your thumb.

For the right glove, work the thumb gusset as follows. On Round 1, knit to the last 3 stitches of the round, place a second stitch marker, M1L (make one left), knit 1, M1R (make one right), place a third stitch marker. You now have 2 extra stitches in the gusset section. On Round 2 and all even-numbered rounds, knit all stitches. On Round 3, slip marker, M1L, knit to the next marker, M1R, slip marker, then knit to end of round.

Continue in this manner, increasing every other round within the markers, until you have 11 stitches in the thumb gusset section (approximately 5 increase rounds). You should now have 46 total stitches on your needles.

On the next round, knit to the first gusset marker, remove the marker, place the 11 thumb gusset stitches on a piece of scrap yarn or a stitch holder, cast on 1 stitch using the backward loop method to bridge the gap, remove the second marker, and continue knitting to the end of the round. You’re back to 36 stitches, with the thumb stitches safely parked on the side.

For the left glove, place the gusset markers at the beginning of the round instead of the end so that the thumb falls on the other side.


Step 5: Continue Knitting the Upper Palm

With the thumb stitches set aside, continue knitting every round in stockinette stitch for approximately 10 more rounds, or until the glove reaches just below your knuckles when you try it on. Everyone’s hands are different, so try the glove on periodically and adjust as needed. You want the edge of the glove to sit right at the base of your fingers, leaving them free to move.


Step 6: Knit the Finger Border

To finish the top edge of the glove cleanly and add a little structure, work 4 to 6 rounds of 2×2 ribbing (knit 2, purl 2) just as you did for the cuff. This creates a tidy, stretchy edge that won’t roll or flare outward.

After your ribbing rounds, bind off all stitches in pattern. Binding off in pattern simply means that when you’re ready to cast off a knit stitch, you knit it; when you’re ready to cast off a purl stitch, you purl it. This keeps the bind-off edge as stretchy as the ribbing itself. Avoid binding off too tightly — if you tend to bind off tightly, go up one needle size for this step.


Step 7: Finish the Thumb

Now it’s time to give your thumb some attention. Place the 11 held thumb stitches back onto your double-pointed needles (or onto a short circular). Rejoin your yarn and pick up and knit 2 or 3 stitches from the gap at the top of the thumb opening to prevent a hole from forming there. You should now have about 13 to 14 stitches.

Work in 2×2 ribbing for 6 to 8 rounds, or until the thumb portion reaches just below your first thumb knuckle. Bind off in pattern as before.


Step 8: Weave in Ends and Block Your Gloves

Thread your tapestry needle with the yarn tails and weave them carefully through the backs of several stitches on the wrong side of the glove. Avoid weaving in a straight line — go in different directions to anchor the tail securely. Trim any excess yarn close to the fabric.

Blocking is the process of gently washing and reshaping your knitted item so it looks its best. For wool or wool-blend yarn, soak the gloves in cool water for about 10 minutes, gently squeeze out the excess water (don’t wring), and lay them flat on a towel to dry. Blocking evens out uneven stitches and gives your gloves a more professional, polished finish. For acrylic yarn, you can skip wet blocking and simply steam-block by holding a steam iron a few inches above the surface.


Common Beginner Mistakes and How to Avoid Them

Knowing what can go wrong will save you a lot of frustration. The most common issue beginners encounter with this type of project is twisted cast-on joins, which create a Möbius-strip-like twist in the fabric. Always double-check before joining. Another common issue is uneven tension around double-pointed needle joins, which creates a visible ladder of looser stitches. To fix this, tighten the first stitch of each new needle slightly as you work around.

Dropping stitches is another frequent challenge, especially on DPNs. If you notice a dropped stitch, don’t panic. Use a crochet hook to pick it back up. Knitting too tightly is also common and makes the glove difficult to put on. If your gauge is off and the glove feels stiff, switch to larger needles.

Finally, forgetting to work the thumb gusset increases on the correct rounds is easy to do when you’re first learning. Counting rounds carefully and using a row counter will help you stay on track.


Tips for Customizing Your Fingerless Gloves

Once you’ve mastered the basic pattern, there’s plenty of room to personalize. You can experiment with different stitch patterns in the body section — a simple cable panel running up the back of the hand looks beautiful and isn’t as difficult as it looks. You can also try working stripes by changing yarn colors every two rounds, which is a great way to use up leftover yarn from other projects.

Adjusting the length is another easy customization. For wrist warmers, stop after the cuff and a few rounds of stockinette. For longer gloves that reach farther up the forearm, simply extend the cuff ribbing section.

If you want to add more texture, try working the entire body in seed stitch (alternating knit and purl stitches in a checkerboard pattern) instead of stockinette. Seed stitch doesn’t require any additional shaping knowledge — just a willingness to alternate your stitches.


Recommended Video Resources

Watching someone knit in real time can fill in the gaps that written instructions leave behind, especially for techniques like the magic loop method, the long-tail cast-on, and working with double-pointed needles. Search for video tutorials on YouTube using terms like “knitting fingerless gloves in the round for beginners,” “how to knit with double-pointed needles,” or “thumb gusset tutorial knitting.” There are several excellent knitting channels run by experienced teachers that offer free, high-quality video guidance on every technique used in this pattern.

For the specific techniques mentioned in this tutorial, look for dedicated videos on the long-tail cast-on, the M1L and M1R increases, and binding off in pattern. Watching each technique before you need to use it will make the actual knitting go much more smoothly.


Final Thoughts

Knitting fingerless gloves for the first time is a genuinely rewarding experience. You’ll learn skills that carry over into nearly every other knitting project you tackle, and you’ll end up with something warm, practical, and handmade. Even if your first pair isn’t perfect — and it probably won’t be, because nothing ever is on the first try — you’ll have learned an enormous amount about how knitting works in the round, how shaping is created, and how a flat piece of fabric can become a three-dimensional object.

Cast on, take it one round at a time, and don’t be afraid to make mistakes. Every experienced knitter has a drawer full of imperfect first attempts, and those imperfect projects are exactly how they got good. Happy knitting!

Categorized in:

Accessories,

Last Update: November 17, 2026