How to Make Braided Rugs: 6 Steps From Start to Finish

How to Make Braided Rugs: 6 Steps From Start to Finish

There is something deeply satisfying about making a braided rug. It is one of those crafts that connects you to a long tradition of practical creativity — early American homemakers made braided rugs from worn-out clothing, flour sacks, and wool scraps because nothing could be wasted. Today, people make them because they are beautiful, durable, and completely customizable. Whether you want a small accent rug for your entryway or a large oval centerpiece for your living room, the braiding method gives you full control over size, color, and texture.

This guide will walk you through the entire process, from choosing your materials all the way to finishing and caring for your rug. If you have never braided a rug before, don’t worry. The technique is simpler than it looks, and once you get the rhythm going, it becomes a genuinely meditative and enjoyable project.


What Makes Braided Rugs Worth Making

Before diving into the steps, it helps to understand why braided rugs have remained popular for centuries. Unlike woven rugs, they require no loom. Unlike hooked rugs, they require no special frame or punch needle tool. All you really need is fabric, a little hardware, and time.

Braided rugs are also incredibly durable. Because the fabric is folded, layered, and tightly interlocked, they hold up beautifully in high-traffic areas. They resist wear better than many commercially made rugs, and when a section does eventually wear out, you can repair it rather than replace the whole thing. Many braided rugs made decades ago are still in use today.

They are also one of the most sustainable craft projects you can take on. Using old wool coats, denim jeans, cotton shirts, or upholstery fabric scraps means you are keeping textiles out of the landfill and turning them into something functional and lovely.


Step 1: Choose and Prepare Your Fabric

The first step is deciding what kind of fabric you want to use, and this decision will shape everything about your finished rug, from its texture and weight to how it handles foot traffic.

Wool is the traditional choice and the gold standard for braided rugs. It is naturally durable, resilient, and forgiving, which means it bounces back well underfoot. Old wool coats and skirts from thrift stores are perfect sources. Look for 100% wool rather than wool blends if you can, since synthetic fibers tend to be less durable and don’t wear as gracefully over time.

Cotton is a great option if you prefer something lighter and easier to wash. Old t-shirts, sheets, denim, and cotton twill fabric all work well. Cotton rugs tend to lie flatter than wool rugs and have a slightly different texture, but they are very durable, especially for kitchens or bathrooms where you need something machine-washable.

Upholstery fabric and denim create extremely dense, heavy-duty rugs that are practically indestructible. These are ideal for mudrooms or workshops where you need something that can handle serious abuse.

Once you have gathered your fabric, preparation is essential. Wash everything before you begin. This removes any finishes or residues and preshrinks the fabric so your finished rug won’t pucker or distort the first time you wash it. If you are using wool, wash it in cool water to avoid felting, unless you actually want a felted texture, which some rug makers prefer.

After washing and drying, it’s time to cut your fabric into strips. The standard width for braided rug strips is between one and a half inches and two and a half inches, depending on how thick and bulky your fabric is. Lighter fabrics like cotton can be cut a bit wider, while heavier wool should be cut narrower so the finished braid isn’t too stiff and difficult to coil. The strips should be cut on the straight grain of the fabric, not on the bias, so they don’t stretch too much during braiding.

One popular method is to cut your fabric into long strips by cutting continuous spirals from a large piece of fabric, which minimizes the number of joins you have to make later. Another approach is to cut fabric into strips across the width and join them end to end. Either way, you will want to press each strip in thirds lengthwise so the raw edges are hidden inside. Many rug makers use a tool called a bias tape maker or a folding aid to do this quickly and consistently. Some people also sew the folded strips closed with a quick machine stitch, but this is optional.

Wind your prepared strips into balls so they don’t tangle as you work. Store each color separately to keep things organized.


Step 2: Plan Your Colors and Design

One of the great joys of making braided rugs is that there are no strict rules about color. You can go completely scrappy and random, mixing whatever fabrics you have on hand, or you can plan a carefully coordinated palette. Both approaches work beautifully.

If you want a more intentional look, lay out your fabric strips and think about how the colors will interact once braided. Braids are typically made with three strands, so consider what a braid of two similar tones and one contrasting tone will look like, or three distinct colors braided together. The braid itself creates a natural rhythm, so even a simple three-color braid has visual interest.

For oval rugs, which are the most common shape for braided rugs, the color placement also creates a kind of striping effect as the braid spirals outward. Changing the color combination of your braid every few rows creates concentric rings, which is a classic look. You can also keep the same braid color throughout for a more uniform appearance, or change individual strands gradually to create a gradual blending effect.

For round rugs, the planning is similar, but you will start from a center point rather than a straight starting row.

Sketch out a rough idea of your color plan before you begin, even if it’s just a few scribbled circles on a piece of paper. This saves a lot of frustration later when you are deep in the project and can’t remember what your original vision was.


Step 3: Start Your Braid

Now comes the actual braiding. If you have ever braided hair, the technique is familiar. You are working with three strands, crossing the right strand over the center, then the left strand over the center, and so on.

To begin, pin or clamp your three strips together at one end. Many rug makers pin this starting point to a heavy pillow, the arm of a sofa, or a piece of foam board so both hands are free to braid. Some people prefer to use a simple clamp or binder clip attached to a table edge.

Fold the starting ends of all three strips under themselves before you pin them, so the raw edges are hidden from the beginning. As you braid, keep the folds tucked in and work consistently so the braid is even and uniform. The goal is a firm, neat braid — not so tight that the strips distort and pucker, and not so loose that the braid is floppy and uneven.

Braid slowly at first, paying attention to how you are holding the tension. The braid should be flat and smooth, with each strand clearly defined. If it looks twisted or uneven, slow down and adjust your grip.

Joining strips: You will inevitably run out of a strip before you finish. When this happens, join the new strip to the old one with a seam. The easiest method is to cut the ends of both strips at an angle and sew them together with a few hand stitches or a quick machine seam, then trim the seam allowance and tuck the join inside the fold. The join should be undetectable once the braid is laced into the rug. Try to stagger your joins so you aren’t adding new strips in all three strands at the same time, which would create a noticeable bump.

As you build up length in your braid, wind it into a loose coil to keep it from tangling.


Step 4: Lace the Braid Into a Rug

Lacing is the technique that holds the braids together and transforms your loose braid into an actual rug. It requires a large blunt needle (a tapestry needle or a special rug lacing needle works well) and a length of lacing cord, which is a strong, flexible thread designed for this purpose. Some rug makers use heavy upholstery thread or even strips of the same fabric they are using for the braid.

The lacing process works by running your needle and thread through the loops on the outer edges of adjacent braids, connecting them without any stitching showing on the surface. When done correctly, lacing is essentially invisible — the rug looks as if it was constructed as a seamless whole.

For an oval rug, start by braiding a straight center section. The length of this center section determines the overall proportions of your rug. For a rug that is roughly 24 inches wide and 36 inches long, your center section should be about 12 inches long. The difference between the length and the width of your desired rug gives you the length of the center section.

Fold your center braid back on itself, creating a U-shape, and begin lacing the two parallel sides of this U together. As you coil the braid around and around the growing oval, continue lacing each new round to the previous one.

The critical technique for keeping the rug flat is managing the corners. As the braid turns around the ends of the oval, you need to allow slightly more slack in the outer braid so it doesn’t pull up and cause the rug to cup or dome. A common rule of thumb is to skip a loop in your lacing every few stitches around the ends, giving the outer braid room to spread. This takes some practice, but you will quickly develop a feel for when the rug is lying flat and when it needs adjustment.

For a round rug, start by braiding a very short center length and then immediately begin coiling. The same principle about adding slack at the outer edges applies as the rug grows.

Work in sections, braiding a foot or two at a time and then lacing before continuing. This keeps the project manageable and lets you check the shape and flatness of your rug regularly.


Step 5: Add More Rounds and Adjust as You Go

This step is really the heart of the project and the phase that takes the most time. You are essentially repeating steps three and four over and over — braiding, lacing, checking for flatness, adjusting, and braiding again — until your rug reaches the desired size.

A few things to watch for during this phase:

If your rug starts to cup upward at the edges, your braids are too tight, or you are not adding enough slack at the curves. Try lacing a little more loosely or skipping extra loops around the ends.

If your rug starts to ruffle or wave, your braids are too loose, or you are adding too much slack. Tighten your lacing slightly.

Lay your rug flat on the floor regularly to check its shape. It should lie completely flat with no bumps or ripples. If you catch a problem early, it is much easier to correct by unlacing a section and redoing it than by trying to fix it once the rug is fully assembled.

Color changes happen naturally as you add rounds. When you want to transition to a new color combination, simply start braiding with new strips in the new colors. Because you are always joining strips with a tucked seam anyway, the transition is smooth.

If you plan to make a very large rug, working on it in sections on the floor becomes important. Large rugs can get surprisingly heavy, and trying to hold the whole thing in your lap becomes impractical. Working on the floor allows you to spread the rug out flat and see the whole shape as you go.


Step 6: Finish and Secure the Ends

When your rug has reached the size you want, it is time to finish it off cleanly so it won’t unravel or fray.

Begin by tapering your three braiding strips gradually. Rather than cutting them all off at the same point, cut each one shorter than the last so the braid tapers down over the course of several inches rather than ending abruptly. This creates a smooth, gradual end to the braid rather than a blunt stop.

As you lace this tapered end to the previous round of the rug, tuck all raw edges inside the braid carefully. Use a few extra stitches at the very end to secure everything firmly. Some rug makers also put a few hand stitches across the final two rounds on the back of the rug just to make absolutely sure the ending is secure.

Trim any loose threads and tuck in any ends that are showing on the back. Turn your rug over and inspect it from both sides to make sure everything looks clean and tidy.


Caring for Your Braided Rug

A well-made braided rug will last for decades with proper care. Shake it out regularly to remove loose dirt. For deeper cleaning, most cotton and denim rugs can be machine washed on a gentle cycle in cool water and air dried flat. Wool rugs should be hand washed or dry cleaned, depending on whether the wool was preshrunk before the rug was made.

Rotate your rug periodically so it wears evenly, especially in high-traffic areas. If a section of braid wears through, you can often repair it by carefully unlacing the damaged section, replacing just those braids, and relacing. This is one of the great advantages of the braided rug construction — it is repairable in a way that most commercially made rugs simply are not.


A Final Word

Making a braided rug is a project that rewards patience. It is not something you will finish in an afternoon, particularly if you are making a large rug. But the work itself is pleasant — rhythmic, satisfying, and completely portable. You can braid while watching television, listening to a podcast, or sitting on a sunny porch.

What you end up with is not just a rug, but something genuinely made by your own hands, from materials you chose, in colors you love, sized exactly to fit your space. That combination of utility and personal expression is what has kept braided rug making alive across generations, and it is a very good reason to pick up some fabric and start braiding today.

Categorized in:

Rugs,

Last Update: November 8, 2026

Tagged in:

, , , ,