Homebody Lounger Knitted Pillow [FREE Knitting Pattern] | LKO

Homebody Lounger Knitted Pillow — Free Knitting Pattern

There is something deeply satisfying about making the thing that holds you while you rest. A pillow sounds like such a small project, but the right pillow — the one you knitted yourself, in a color you chose, with a texture your hands shaped row by row — becomes one of those objects in a home that quietly means something. This Homebody Lounger Knitted Pillow pattern is designed exactly for that feeling. It is a modern, chunky, textured pillow cover that works up quickly, looks beautiful on any couch or bed, and makes a genuinely thoughtful handmade gift.

Whether you are a beginner who has just mastered the knit and purl stitch or an experienced knitter looking for a satisfying weekend project, this pattern is for you. The construction is straightforward, the stitch pattern is forgiving and rhythmic, and the result is a pillow that looks like it belongs in a high-end home décor shop — because it does, really, once you put it there.

Let’s talk through everything: materials, gauge, pattern notes, the stitch pattern itself, finishing, and plenty of tips along the way.


About This Pattern

The Homebody Lounger is a 20-inch square pillow cover worked in a simple moss stitch variation that creates a dense, textured fabric with beautiful visual interest. The cover is worked flat in two panels that are seamed together on three sides, with a simple overlapping envelope closure at the back so you do not need any buttons, zippers, or additional hardware. The whole thing slips on and off easily, which makes washing practical.

The name came naturally. This is a pillow for homebodies — for people who have perfected the art of a slow morning on the couch, who keep a good book on the coffee table, who understand that the right cushion makes the difference between sitting and truly settling in. If that sounds like you, or someone you love, read on.


Materials

To make one Homebody Lounger Knitted Pillow, you will need the following:

Yarn: Approximately 400–450 yards of a bulky weight yarn (US size 6 / CYCA weight 6). The sample shown uses a single-ply merino or wool blend in a neutral tone — warm cream, oat, dusty sage, and slate grey all look stunning. You can absolutely use a cotton or cotton-blend yarn if you prefer a cooler-feeling pillow, though a soft wool or merino will give you that cozy, cloud-like drape.

Needles: US size 10.5 (6.5 mm) straight or circular needles, at least 24 inches long if using circulars. You can also use two sets of straight needles if you prefer, one for each panel.

Notions: A tapestry needle for seaming and weaving in ends, scissors, stitch markers (optional but helpful), and a 20-inch square pillow insert. Most craft stores and home goods stores carry these in the standard size, and you can also find them easily online. Look for a firm insert rather than a flat one — a pillow insert that is slightly overstuffed will give your finished cover a plump, full look.

Gauge: 13 stitches and 20 rows = 4 inches in moss stitch on US 10.5 needles after blocking. Gauge does matter here because the cover needs to fit snugly around the insert. Take the time to knit a swatch, wash and dry it the same way you plan to care for the finished pillow, and measure carefully. If your swatch is too loose, go down a needle size. If it is too tight, go up a needle size.


Skill Level

Beginner to Intermediate. If you are comfortable with knit and purl stitches and can seam two pieces of knitting together neatly, you have everything you need. There are no increases, decreases, or complex techniques in this pattern.


Sizing

This pattern is written for a 20-inch square pillow insert. If you want to adjust for a different size insert, the adjustment section later in this post will walk you through the math.


Abbreviations

Before diving into the pattern, here are the abbreviations used throughout:

k — knit
p — purl
RS — right side
WS — wrong side
CO — cast on
BO — bind off
rep — repeat
st(s) — stitch(es)
pm — place marker
sl m — slip marker


Understanding the Stitch Pattern: Moss Stitch

The Homebody Lounger is worked in moss stitch, which is sometimes called seed stitch depending on where you learned to knit and which knitting tradition you are working from. For this pattern, moss stitch is worked as follows:

Row 1 (RS): K1, p1; rep from to end.
Row 2 (WS): K1, p1; rep from to end.
Row 3 (RS): P1, k1; rep from to end.
Row 4 (WS): P1, k1; rep from to end.

Repeat these four rows for the pattern.

The key thing to understand about moss stitch is that you are always knitting the purls and purling the knits — but the offset happens every two rows rather than every row (which is what seed stitch does). This creates a slightly more elongated texture, a fabric that is thicker and has more of a woven appearance. It also lies beautifully flat, which makes it ideal for pillow covers because you will not have any curling edges to wrestle with.

If you have worked seed stitch before and prefer that texture, you can absolutely substitute it here. The fabric weight and yardage will be very similar.


The Pattern

Front Panel

CO 66 stitches using your preferred cast-on method. A long-tail cast on works beautifully here and gives you a neat, stable edge.

Work in moss stitch as established above until your piece measures 20 inches from the cast-on edge. This will be approximately 100 rows, though row count will vary slightly based on your individual gauge, so measuring is more reliable than counting rows.

BO all stitches loosely in pattern. To bind off in pattern, work each stitch as you would for the next stitch in the pattern before passing it over. This keeps the bind-off edge as stretchy and textured as the rest of your fabric.

Back Panel — Lower Section

CO 66 stitches.

Work in moss stitch until your piece measures 13 inches from the cast-on edge.

BO all stitches loosely in pattern.

Back Panel — Upper Section

CO 66 stitches.

Work in moss stitch until your piece measures 11 inches from the cast-on edge.

BO all stitches loosely in pattern.

Notes on the Back Panels

The two back panels are intentionally different lengths. When assembled, they will overlap in the center of the back of the pillow by approximately 4 inches, creating the envelope closure. This overlap is what holds the pillow insert in place. If you want a tighter closure, you can add an extra inch to each panel; if you prefer a looser closure that lets you get the insert in and out more easily, reduce by half an inch on each.


Finishing

Finishing is where a knitted project truly becomes the thing it was meant to be. Take your time here. It makes an enormous difference.

Weave in ends first. Before you do anything else, thread your tapestry needle and weave in all yarn tails on each panel. Weave them in multiple directions — horizontally, then back diagonally — so they will not work their way loose over time.

Block your panels. Fill a basin or bathtub with cool water and submerge all three panels. Let them soak for about 20 minutes. Gently press out the water (do not wring or twist), then roll each panel in a dry towel and press firmly to remove as much moisture as possible. Lay each panel flat on a blocking mat or clean, dry surface, pin to the correct dimensions, and allow to dry completely. Blocking will even out your stitches, open up the texture, and make seaming much easier.

Assemble the cover. Once all three panels are fully dry, lay the front panel flat with the right side facing up. Place the lower back panel on top of it, right side facing down, aligning the bottom and side edges. Place the upper back panel on top of that, right side facing down, aligning the top and side edges. The two back panels will overlap in the middle — this is correct.

Pin all four sides in place. Using your tapestry needle and a length of yarn, seam around all four sides using mattress stitch or whip stitch. Mattress stitch gives the most invisible seam on the sides; whip stitch is faster and still looks clean. Work through both layers at each corner, making sure your corners are square.

Trim any remaining yarn ends and turn the cover right side out through the envelope opening in the back. It should turn neatly and the overlap should close over itself.

Insert the pillow form. Fold your 20-inch insert diagonally if needed to work it through the opening, then settle it into the corners. Give the cover a gentle pull and smooth at the edges so the insert fills it evenly. The finished pillow should be plump and full.


Adjusting for Different Sizes

If you are working with a different pillow insert size, here is how to adjust the pattern.

Knit a gauge swatch and measure your stitch gauge (stitches per inch). Multiply your stitch gauge by the width of your pillow insert in inches to get your cast-on number. For example, if your gauge is 3.25 stitches per inch and you are making a 16-inch pillow, you would cast on approximately 52 stitches.

For the length of the front panel, work until the piece measures the same as your insert’s height.

For the back panels, the lower piece should measure approximately 65% of the insert’s height and the upper piece should measure approximately 55%, so that they overlap by about 20% in the center.

The same envelope construction works for any square or rectangular pillow insert.


Yarn Substitution Tips

This pattern is designed to be yarn-flexible, and part of the fun is choosing the right yarn for your space and your mood. Here are some things to consider when substituting.

If you go with a pure merino wool, expect a soft, slightly halo-y fabric that will bloom beautifully after washing and feel impossibly cozy. It is the most pillow-perfect choice for a bedroom or reading nook.

Cotton and cotton blends will give you a crisper, cooler fabric with more stitch definition. This is a great choice for a pillow that will live on a porch, in a sunroom, or somewhere that gets warm. Cotton also washes extremely well.

Acrylic yarn is a perfectly valid and practical choice, especially if the pillow will be in a high-use area or the household includes pets or children who may require frequent washing. Look for a soft acrylic — the category has improved enormously in recent years, and there are acrylic yarns available now that rival the hand of natural fibers.

Whatever yarn you choose, be sure it is machine washable or that you are prepared to hand-wash the finished cover. A pillow that cannot be cleaned is a pillow that will not stay loved for long.


Color Ideas and Styling

The sample for this pattern was knit in a warm cream, but the Homebody Lounger really shines in almost any color. Here are some combinations that work particularly well for different aesthetics.

For a neutral, natural home, try oatmeal, flax, warm grey, or undyed natural wool. These look beautiful together and can be mixed across a couch in coordinating tones for a collected, layered look.

For a modern, moody space, deep slate, charcoal, forest green, or navy make a dramatic statement while still feeling comfortable and grounded. A single pillow in one of these colors placed on a natural linen sofa is a genuinely striking combination.

For a warmer, more colorful home, dusty terracotta, soft rust, pale golden yellow, or muted rose bring in color without overwhelming a space. The texture of moss stitch reads particularly beautifully in warmer tones.

You can also knit the front and back panels in different colors for a reversible pillow that changes with your mood or the season. Use up partial skeins, play with contrast — this pattern is forgiving enough to handle it beautifully.


Gifting This Pillow

A handknit pillow is one of the best gifts you can give someone, and the Homebody Lounger is particularly well-suited to gifting because it looks finished and intentional in a way that is immediately apparent to anyone who receives it. It is the kind of gift that earns a genuine reaction.

A few tips for gifting: match the yarn color to what you know about the recipient’s home. If you have been to their house, think about what colors are on their walls and furniture. If you have not, neutrals are always safe and always welcome. Pair the finished pillow with the insert already inside it so the gift feels complete and ready to use. And consider writing a small card that mentions it was handknitted — many people genuinely do not know that something this polished came from knitting needles, and knowing that it did makes it more meaningful.


Care Instructions

The care for your finished pillow will depend on the fiber content of the yarn you used. In general, the cover can be removed from the insert and washed separately.

For wool and merino: hand wash in cool water with a gentle wool wash, press out excess water, and lay flat to dry. Do not wring, twist, or place in a dryer on high heat, as this will cause felting.

For superwash wool (wool that has been treated to be machine washable): follow the yarn label instructions, which will typically indicate a gentle machine wash in cold water. Reshape while damp and lay flat to dry.

For cotton and acrylic: machine wash on a gentle cycle in cold water. Tumble dry on low or lay flat to dry. These fibers are the most durable and forgiving with washing.

Always keep the yarn label from your project. It has the specific care instructions for the fiber you used, and it is worth taping it to an index card or tucking it in a drawer for future reference.


A Few Final Thoughts

The best thing about knitting a pillow is that it is a project you will live with for a long time. Unlike a scarf that gets tucked into a coat closet for half the year, a pillow is present every single day. You will reach for it on tired evenings. It will anchor the couch or the bed or the reading chair that it lands on. If you give it as a gift, you will see it in photographs of the recipient’s home and know that you made the thing that made the room feel like theirs.

The Homebody Lounger is not a complicated knit. It does not need to be. Some of the best things we make are the simplest ones — the ones where the rhythm of the work is part of the pleasure, where the texture emerges stitch by stitch, where the finished object is so honest about what it is that it needs no explanation.

Cast on. Knit a few rows. Feel how the moss stitch comes together under your hands. By the time you finish, you will have made something genuinely worth having.

Happy knitting.


If you make the Homebody Lounger Knitted Pillow, we would love to see it. Share your finished project and tag it so the community can find you. And if you have any questions about the pattern, leave them in the comments below — we answer every one.

Categorized in:

Cushion / Pillow,

Last Update: November 7, 2026