
Crochet Witch Hat Pattern — Adult Size | Love Crochet Diary
If you’ve been searching for the perfect crochet witch hat pattern for adults, you’ve landed in the right place. Whether you’re crafting for Halloween, a costume party, a Renaissance faire, or just because you love the whimsical charm of a pointy hat, this pattern is designed with you in mind. It’s beginner-friendly enough that newer crocheters can tackle it with confidence, yet satisfying enough for seasoned crafters who want a quick and rewarding project.
This crochet witch hat pattern creates a classic, tall, brimmed witch hat that sits beautifully on an adult head. The finished hat is sturdy, shapeable, and absolutely stunning when dressed up with ribbons, flowers, spiders, or whatever magical embellishments call to your creative soul. Let’s gather our supplies and get started.
Why You’ll Love This Pattern
Before we dive into the stitches, let’s talk about what makes this particular witch hat pattern worth your time. First, it uses basic crochet stitches — primarily single crochet and half double crochet — so you won’t need to learn anything complicated to get a professional-looking result. Second, the construction is worked in two separate pieces (the cone and the brim) that are then joined together, which makes shaping much easier and more precise than trying to work the whole hat in one go. Third, the hat is worked with a slightly smaller hook than you might expect for the yarn weight, which creates a tighter, denser fabric that holds its cone shape without needing wire or stiffening spray — though you can certainly use those if you prefer an extra-dramatic silhouette.
The finished hat fits most adult heads with a circumference of 21 to 23 inches, which covers the vast majority of adult sizes. If you need to adjust, there are modification tips included at the end of this post.
Materials You’ll Need
To make your crochet witch hat, gather the following supplies before you begin. Having everything ready before you cast on (or rather, slip-knot) makes the process so much smoother.
Yarn: Approximately 200 to 250 yards of worsted weight yarn (Category 4) in black. You can use any fiber you prefer — acrylic works beautifully here because it’s affordable, widely available, and tends to have a bit of body that helps the hat hold its shape. If you want a more luxurious feel, a wool-blend works wonderfully too.
Hook: US Size G/6 (4.00 mm) or H/8 (5.00 mm). Start with the G hook for a tighter fabric that holds the cone shape better. If your gauge is naturally tight, you may prefer the H hook.
Stitch markers: At least two, to mark the beginning of each round.
Yarn needle: For weaving in ends and seaming the two pieces together.
Scissors: Any pair will do.
Optional embellishments: Ribbon, faux flowers, spider charms, buckle trim, buttons, lace, dried botanicals — this is where the real magic happens. Set aside about 1 to 1.5 yards of ribbon if you want the classic witch hat band look.
Optional: Fabric stiffener or starch spray if you want an extra-crisp cone.
Gauge
Gauge is important here because the hat needs to fit an adult head. With worsted weight yarn and a G/6 hook, your gauge should be approximately:
14 stitches and 16 rows = 4 inches in single crochet.
If your gauge is looser (fewer stitches per inch), go down a hook size. If it’s tighter (more stitches per inch), go up a hook size. Always swatch when fit matters.
Abbreviations Used in This Pattern
This pattern uses standard US crochet terminology.
ch — chain
sl st — slip stitch
sc — single crochet
hdc — half double crochet
dc — double crochet
MR — magic ring (also called magic circle)
inc — increase (2 stitches in the same stitch)
st(s) — stitch(es)
rnd — round
rep — repeat
BLO — back loop only
sp — space
Pattern Notes
This hat is worked in continuous rounds (a spiral), not joined rounds, unless otherwise noted. Use a stitch marker to track the beginning of each round and move it up as you go. The cone is worked from the top down, beginning with a small magic ring and gradually increasing to fit the head. The brim is worked separately and then seamed to the bottom of the cone for maximum control over the shape.
If you’re new to working in the round or to magic rings, there are plenty of wonderful tutorials available online. A magic ring might feel fiddly the first time, but it creates the neatest, most closed center for the top of your cone, so it’s worth practicing.
Part One: The Cone
The cone is the tall, pointy section of the witch hat. It begins at the very tip and grows downward, with increases added gradually to shape the gentle slope of the cone.
Round 1: Start with a magic ring. Work 6 sc into the ring. Pull the ring closed. (6 sts)
Round 2: Inc in each st around. (12 sts)
Round 3: *Sc in next st, inc in next st* rep around. (18 sts)
Round 4: Sc in each st around. (18 sts)
Round 5: *Sc in next 2 sts, inc in next st* rep around. (24 sts)
Round 6: Sc in each st around. (24 sts)
Round 7: *Sc in next 3 sts, inc in next st* rep around. (30 sts)
Round 8: Sc in each st around. (30 sts)
Round 9: *Sc in next 4 sts, inc in next st* rep around. (36 sts)
Round 10: Sc in each st around. (36 sts)
Round 11: *Sc in next 5 sts, inc in next st* rep around. (42 sts)
Round 12: Sc in each st around. (42 sts)
Round 13: *Sc in next 6 sts, inc in next st* rep around. (48 sts)
Rounds 14–16: Sc in each st around. (48 sts)
Round 17: *Sc in next 7 sts, inc in next st* rep around. (54 sts)
Rounds 18–20: Sc in each st around. (54 sts)
Round 21: *Sc in next 8 sts, inc in next st* rep around. (60 sts)
Rounds 22–24: Sc in each st around. (60 sts)
Round 25: *Sc in next 9 sts, inc in next st* rep around. (66 sts)
Rounds 26–28: Sc in each st around. (66 sts)
Round 29: *Sc in next 10 sts, inc in next st* rep around. (72 sts)
Rounds 30–32: Sc in each st around. (72 sts)
Round 33: *Sc in next 11 sts, inc in next st* rep around. (78 sts)
Rounds 34–36: Sc in each st around. (78 sts)
At this point, the cone should be quite long and have a beautiful, gradual taper. Try it on (or place it on the head of your lucky model) to get a sense of the size. The opening at this point should be close to fitting a standard adult head. If you want a taller hat — think extra-dramatic witch vibes — you can add a few more plain rounds before beginning the brim section.
Round 37: *Sc in next 12 sts, inc in next st* rep around. (84 sts)
Rounds 38–39: Sc in each st around. (84 sts)
After Round 39, slip stitch to join the round. Fasten off, leaving a long tail for seaming. This is the bottom edge of the cone, which will be attached to the brim.
Part Two: The Brim
The brim gives the witch hat its iconic look — that wide, flat, slightly curved platform that frames the face and makes the whole silhouette instantly recognizable. The brim is worked outward from a central ring that matches the circumference of the cone’s opening.
To begin the brim, create a foundation that matches the stitch count at the bottom of your cone. You’ll work in joined rounds here (joining with a sl st at the end of each round), because the flat, wide nature of the brim benefits from the small break a joined round provides — it helps keep the brim from curling excessively.
Round 1 (Foundation): Ch 85, sl st to first ch to form a ring (being careful not to twist). Ch 1, sc in each ch around, sl st to join. (84 sts)
Round 2: Ch 2 (counts as first hdc), hdc in same st, hdc in next st, *inc in next st, hdc in next st* rep around, sl st to join. (126 sts)
Round 3: Ch 1, sc in each st around, sl st to join. (126 sts)
Round 4: Ch 2 (counts as first hdc), hdc in same st, hdc in next 2 sts, *inc in next st, hdc in next 2 sts* rep around, sl st to join. (168 sts)
Round 5: Ch 1, sc in each st around, sl st to join. (168 sts)
Round 6: Ch 3 (counts as first dc), dc in same st, dc in next 3 sts, *inc in next st, dc in next 3 sts* rep around, sl st to join. (210 sts)
Round 7: Ch 1, sc in each st around, sl st to join. (210 sts)
Round 8: Ch 3 (counts as first dc), dc in same st, dc in next 4 sts, *inc in next st, dc in next 4 sts* rep around, sl st to join. (252 sts)
Round 9: Ch 1, sc in each st around. Sl st to join. Fasten off and weave in ends.
The brim should be wide and flat, fanning out dramatically from the center ring. If it’s cupping (curving upward) rather than lying flat, you need more increases. If it’s ruffling, you have too many increases and can rip back a round or two.
Joining the Cone and Brim
Now comes the satisfying part — bringing the two pieces together into a full witch hat.
Hold the cone with the opening facing down and the brim with the center ring facing up. Line up the last round of the cone with the foundation ring of the brim. The stitches should line up fairly evenly around the circle.
Using your yarn needle and a length of black yarn, whip stitch or mattress stitch around the entire circumference, joining the cone to the brim. Take your time here — this seam is structural, so you want it to be secure. Work through both loops of the stitches on each piece for the sturdiest join.
Once you’ve gone all the way around, knot the yarn securely and weave in the end well. Turn the hat right-side up and marvel at your creation.
Shaping the Hat
This is a step many patterns skip, but it makes a huge difference in the final look. Fresh off the hook, your cone may lean slightly or have a subtle wobble — that’s completely normal and totally fixable.
For a natural, slightly rakish look: simply adjust the cone with your hands, pressing gently along the sides to emphasize the taper, and let it dry in the shape you like. If you used acrylic yarn, a very light steam (hold the iron a few inches above — never touch acrylic with direct heat) can help the fibers relax into the shape.
For a stiff, dramatic silhouette: spray the entire hat with spray starch or fabric stiffener. Stuff the cone loosely with plastic bags or tissue paper to hold the shape, and leave the hat to dry completely — this usually takes a few hours or overnight. Once dry, remove the stuffing and the hat will hold its shape beautifully.
For a wired, poseable brim: you can sew or weave thin millinery wire around the outer edge of the brim. This allows you to bend and position the brim any way you like — curved up at the sides, bent dramatically down in front, or perfectly flat.
Embellishment Ideas
A plain black witch hat is elegant and classic, but embellishments are where the fun really begins. Here are some ideas to inspire your magical creativity.
A wide satin or velvet ribbon wrapped around the base of the cone, where it meets the brim, creates the classic witch hat band. Tie it in a bow at the back or secure it with a large vintage button or buckle for extra drama. About 1 to 1.5 yards of ribbon is usually enough.
Faux flowers — especially dark roses, dried lavender, or black and purple dahlias — tucked into the ribbon band give the hat a beautiful witchy-botanical vibe. These work especially well for a garden witch or forest witch aesthetic.
Small spider charms, skeleton keys, moon and star buttons, or tiny mushroom picks can be pinned or sewn directly to the hat for a more eclectic look. Think of your hat as a tiny altar you can wear on your head.
Lace trim along the brim edge elevates the hat from costume piece to wearable art. Black Chantilly lace is especially gorgeous.
Yarn pom-poms in orange, purple, or green scattered across the brim are charming and playful — perfect if the hat is for a Halloween party where whimsy is the order of the day.
Size Modification Tips
If the hat is too small: Add more increase rounds at the bottom of the cone (before Round 37) until the opening comfortably spans your head circumference. Each increase round adds 6 stitches. You’ll also want to start your brim foundation chain with a stitch count that matches your larger cone opening.
If the hat is too large: Work the cone with a smaller hook or stop the increases a round or two earlier. Measure your head circumference (average adult is 21–23 inches) and calculate approximately 3.5 stitches per inch at your gauge to determine your target stitch count at the opening.
If you want a shorter hat: Simply stop adding increase rounds earlier and join the brim at whatever stitch count you’ve reached. A shorter cone with a wide brim creates a beautiful vintage-style witch hat.
If you want an extremely tall hat: Continue the increase rounds past Round 37, adding increases and plain rounds in the established pattern until the cone is as tall as you like. Very tall hats (12 inches or more) benefit from internal stiffening to keep the tip from flopping over.
Caring for Your Crochet Witch Hat
If you’ve used acrylic yarn, your hat is machine washable on a gentle cycle in cold water. Lay flat to dry and re-shape as needed. Avoid high heat, which can warp acrylic fibers permanently.
If you’ve used wool or a natural fiber blend, hand wash in cool water with a gentle wool wash, press out excess water gently (don’t wring), and lay flat to dry. Wool will shrink in hot water, so always keep it cool.
If you’ve used fabric stiffener on the hat, spot-clean only, as rewetting the hat will dissolve the stiffener and the hat will need to be re-shaped and re-stiffened after washing.
A Few Final Thoughts
This crochet witch hat pattern has become one of my favorite things to make each autumn, but honestly, I’ve been known to wear mine year-round — perched on a shelf, draped over a lamp, or pulled out for themed dinner parties and full-moon celebrations. There’s something genuinely joyful about a pointy hat. It announces to the world that magic is afoot.
If you make this hat, I would absolutely love to see it. Share your finished project on social media and tag Love Crochet Diary so I can admire your work. Leave a comment below if you have questions, run into trouble with any of the rounds, or