Bugdroid Amigurumi: The Complete No-Sew Crochet Pattern for Android’s Iconic Robot
If you’ve ever wanted to crochet your very own Bugdroid — the little green robot that has become the beloved mascot of the Android operating system — you’re in exactly the right place. This free amigurumi pattern is designed from start to finish as a completely no-sew project, meaning every single piece is joined as you go or attached using only your crochet hook. No needle, no thread, no frustration. Just your hook, some yarn, and a whole lot of fun.
Whether you’re a seasoned amigurumi maker looking for a satisfying weekend project or an intermediate crocheter ready to try something a little more structured, this Bugdroid pattern is approachable, detailed, and completely customizable. By the end, you’ll have an adorable desktop companion that any Android fan will immediately recognize and love.
What Is Bugdroid?
Bugdroid is the official mascot of Google’s Android mobile operating system. Designed in 2007 by graphic designer Irina Blok, the character was inspired by the universal bathroom-door symbols for men and women. The result was a simple, friendly, rounded green robot with a dome-shaped head, cylindrical body, stubby arms, and two little antennae. The design was released under a Creative Commons license, which means artists and crafters around the world have been reimagining, remixing, and recreating Bugdroid ever since.
Crocheting Bugdroid as an amigurumi is a natural fit. Amigurumi — the Japanese art of crocheting or knitting small stuffed figures — relies on tight, round construction that perfectly captures the soft geometry of Bugdroid’s design. The rounded head, the simple limbs, the compact body: it all translates beautifully into yarn.
Materials You Will Need
Before you begin, gather everything on this list. Having your supplies ready at the start will make the process smoother and more enjoyable.
Yarn: Worsted weight (size 4) yarn in bright Android green (sometimes called lime green or chartreuse green), plus a small amount of black yarn for the eyes and a tiny bit of white or light gray for the eye details if desired. You can use any brand you like. Caron Simply Soft, Lion Brand Vanna’s Choice, and Red Heart Super Saver all work wonderfully for this project.
Hook: A 3.5 mm or 4.0 mm crochet hook. Using a slightly smaller hook than what your yarn recommends will produce a tighter fabric, which helps keep the stuffing from showing through and gives your amigurumi a clean, professional look.
Stuffing: Polyester fiberfill stuffing. Use enough to give each piece a firm but not rock-hard feel. Bugdroid should be pleasantly squeezable.
Safety eyes: Two 9 mm black safety eyes. These are used in the no-sew version and are inserted and secured before the piece is closed up.
Stitch markers: Locking stitch markers or scraps of contrasting yarn to mark the beginning of each round. Because amigurumi is worked in continuous rounds rather than joined rounds, keeping track of your place is essential.
Scissors and a yarn needle: You will use scissors to cut yarn and a yarn needle only to weave in ends — not to sew any pieces together. Every attachment in this pattern is done with the crochet hook.
Abbreviations and Stitch Guide
This pattern uses US crochet terminology.
MR — Magic ring (also called magic circle or adjustable ring). Pull up a loop, chain one, and work the first round into the ring before pulling it tight.
sc — Single crochet
inc — Increase: two single crochets worked into the same stitch
dec — Invisible decrease: insert hook into the front loop of the next stitch, then into the front loop of the stitch after that, yarn over and pull through both loops, yarn over and pull through the two loops on the hook
ch — Chain
sl st — Slip stitch
FLO — Front loop only
BLO — Back loop only
(x) — Repeat the sequence in parentheses x times
[x] — Total stitch count at the end of the round
Pattern Notes
All pieces are worked in continuous rounds unless otherwise specified. Do not join rounds with a slip stitch and do not chain up at the beginning of rounds. Move your stitch marker up at the end of each round to keep your place.
The no-sew construction in this pattern works by leaving a long tail of yarn when you begin or end a piece, then crocheting the pieces together using a join-as-you-go technique. Specific instructions are given within each section.
The finished Bugdroid stands approximately 5 to 6 inches tall depending on your yarn and tension.
Part One: The Body
The body is a cylinder with a slightly tapered bottom. Start with the base and work upward.
Round 1: MR, 6 sc [6]
Round 2: inc in each st around [12]
Round 3: (sc 1, inc) repeat around [18]
Round 4: (sc 2, inc) repeat around [24]
Round 5: (sc 3, inc) repeat around [30]
Round 6: (sc 4, inc) repeat around [36]
Rounds 7–10: sc in each st around [36]
Round 11: (sc 4, dec) repeat around [30]
Rounds 12–16: sc in each st around [30]
Round 17: (sc 3, dec) repeat around [24]
Rounds 18–20: sc in each st around [24]
At this point, begin stuffing the body firmly. Continue stuffing as you work the final rounds.
Round 21: (sc 2, dec) repeat around [18]
Round 22: (sc 1, dec) repeat around [12]
Do not fasten off. Leave the top open. You will attach the head directly onto the body opening in a later step. Set aside with a stitch marker in the live loop.
Part Two: The Head
The head is a dome shape — taller than a typical amigurumi ball so that it has Bugdroid’s characteristic rounded-rectangular profile when viewed from the side.
Round 1: MR, 6 sc [6]
Round 2: inc in each st around [12]
Round 3: (sc 1, inc) repeat around [18]
Round 4: (sc 2, inc) repeat around [24]
Round 5: (sc 3, inc) repeat around [30]
Rounds 6–11: sc in each st around [30]
Round 12: (sc 3, dec) repeat around [24]
Round 13: sc in each st around [24]
Before continuing to close the head, attach the safety eyes now. Position them in Round 8 or 9, spaced about 8 stitches apart and centered on the front of the head. Push the posts through, attach the washers firmly on the inside, and confirm you’re happy with their placement before proceeding — once the washers are on, safety eyes cannot be removed without special tools.
Stuff the head firmly.
Round 14: (sc 2, dec) repeat around [18]
Round 15: (sc 1, dec) repeat around [12]
Round 16: dec around [6]
Fasten off and leave a long tail of approximately 12 inches. Use a yarn needle to weave through the front loops of the remaining 6 stitches and pull tight to close. Knot securely. Do not cut this tail yet — you will use it during the no-sew attachment.
No-Sew Head Attachment
This is the heart of the no-sew technique. With the body still live on your hook, hold the head on top of the body opening with the face pointing forward. Insert your crochet hook through one stitch of the body opening and one stitch at the bottom edge of the head at the same time. Draw the live loop through, then single crochet around the entire join, working through both layers simultaneously. This creates a firm, clean attachment without any visible seam from the outside.
Work 12 single crochets around the join. Slip stitch to close. Fasten off and weave in ends.
Part Three: The Arms
Make two. The arms are simple tubes with rounded tops.
Round 1: MR, 6 sc [6]
Round 2: inc in each st around [12]
Round 3: sc in each st around [12]
Round 4: (sc 1, dec) repeat around [8]
Rounds 5–10: sc in each st around [8]
Do not stuff the arms heavily — a small pinch of stuffing at the rounded end is enough, or leave them unstuffed entirely for a floppy, endearing look. Both options are charming and true to different versions of the Bugdroid character.
To attach the arms without sewing, hold one arm flat against the side of the body at approximately Round 14–15. Insert your hook through two stitches of the body and two stitches of the arm opening. Single crochet around to join, working 8 single crochets around the join. Fasten off and weave in the end. Repeat for the second arm on the other side of the body.
Part Four: The Legs
Make two. The legs are short, rounded tubes similar to the arms but slightly stubbier.
Round 1: MR, 6 sc [6]
Round 2: inc in each st around [12]
Round 3: sc in each st around [12]
Round 4: (sc 1, dec) repeat around [8]
Rounds 5–8: sc in each st around [8]
Stuff lightly. To attach, position each leg at the bottom of the body, spaced evenly apart, centered on the front. Use the same join technique: insert your hook through both the leg opening and the bottom edge of the body, and single crochet around the join to secure. Fasten off and weave in.
Part Five: The Antennae
Bugdroid’s two little antennae are one of his most distinctive features. These are worked as simple chains with a small bobble at the top.
For each antenna:
Round 1: MR, 6 sc [6]
Round 2: sc in each st around [6]
Round 3: (sc 1, dec) repeat around [4]
Slip stitch to close. Fasten off and leave a tail of about 10 inches.
To attach the antennae to the top of the head without sewing, poke your crochet hook down through the top of the head at the desired position. Draw the tail of the antenna through to the inside of the head and knot it tightly around two internal strands of yarn, then weave the tail further into the stuffing to anchor it. This no-sew anchor method holds just as securely as stitching when done with care.
Place the antennae approximately 1 inch apart, positioned slightly toward the front of the head.
Part Six: Finishing Touches
Even in a no-sew project, there are a few small finishing details that take your Bugdroid from good to great.
Weave in all ends using your yarn needle. Bury them deep into the stuffing so they don’t peek out or loosen over time.
Check all joins — give the arms, legs, and antennae a gentle tug to confirm everything is secure. If any join feels loose, you can reinforce it by running your hook back through the join stitches and pulling the tail through a few more times.
Optional details: If you want to give your Bugdroid a mouth, you can use a small length of black yarn and your hook to work a simple surface slip stitch smile across the lower front of the face. Work two or three slip stitches in a gentle upward curve for a classic Bugdroid grin. Pull the tails to the inside and knot off.
Optional screen detail: Some crafters add a small rectangle of black felt or a crocheted black panel to the front of the body to represent an Android phone screen. This isn’t part of the core pattern but is a fun customization if you want Bugdroid to look like he’s holding a device.
Tips for a Perfect Bugdroid
Getting the proportions right is the key to a recognizable Bugdroid. The head should feel about the same size as the body, maybe just slightly larger. If your head is coming out too small, try going up half a hook size for the head only. If it’s too large, go down half a size.
The color you choose matters more than you might expect. True Bugdroid green is a bright, slightly yellow-toned green — think fresh spring leaves rather than hunter green or olive. Most yarn brands carry at least one shade in this range. If you hold your yarn up to a photo of the Android mascot on your phone screen, you’ll know immediately whether it’s the right shade.
Keep your tension consistent and on the tighter side throughout. Amigurumi worked with loose tension tends to let stuffing peek through the stitches, which affects the finished look significantly.
If you’re making this as a gift for an Android developer or a tech-loving friend, consider using a slightly larger hook and bulkier yarn to make a bigger version. The pattern scales very naturally — just maintain the proportions between pieces.
Customization Ideas
One of the most joyful things about crocheting Bugdroid is how many ways you can personalize him. Since the Android mascot has been officially released for creative reuse, the crafting community has created thousands of unique interpretations.
Try making a holiday version with a tiny crocheted Santa hat or reindeer antennae worked in brown yarn. A graduation Bugdroid with a little mortarboard cap is a wonderful handmade gift. You can make a whole team of Bugdroids in different colors to represent different apps or Android versions — the various Android version mascots like Cupcake, Donut, Éclair, Froyo, and Gingerbread are all beloved in the community.
You can also make a keychain version by scaling the pattern down with a 2.5 mm hook and fingering weight yarn, then adding a split ring to the top of the head.
Sharing Your Bugdroid
When you’ve finished your Bugdroid, show him off! Share photos to your social media, tag your posts with amigurumi and crochet communities, and consider posting your finished object to Ravelry if you keep a project page there. The crochet community is incredibly welcoming and other makers love to see finished versions of patterns they’re considering.
If you make any modifications to the pattern — adjustments to sizing, changes to the color scheme, creative embellishments — consider leaving a note about what you changed. Your version might be exactly what another maker needs to see.
Final Thoughts
Crocheting a Bugdroid amigurumi is one of those projects that feels deeply satisfying from the first stitch to the last. The familiar shape emerges quickly, the no-sew construction keeps things clean and accessible, and the finished piece has a personality that’s hard not to love. There’s something genuinely delightful about holding a tiny yarn robot that represents billions of devices, millions of developers, and decades of open-source spirit — all rendered in soft green worsted weight and a bit of fiberfill.
Whether this sits on your desk, hangs from your backpack, or gets gifted to the Android fan in your life, your Bugdroid will be a one-of-a-kind creation made entirely by your hands. And that, more than any app or operating system, is something to be proud of.
Happy crocheting.
